106178 Craftsman - Overview

Models starting with 106178

Click on the best match to narrow your results.

Parts for models starting with 106178

Square Head Machine Bolt (8 pack)

Part #STD522505

Screw 2Pk

Part #STD503705

Crd Kit Assm

Part #EC100200AJ

Screw 5Pk

Part #STD502505

Belt

Part #STD304340

B1212 Brg

Part #STD311212

Manifold

Part #V-205301AV

Nipple

Part #HF002401AV

Wheel

Part #WA003900AV

Truss Screw 8 pck

Part #STD522510

Gasket

Part #XA003100AV

Comp Slv

Part #STD575038

Exact Part matches for your search term

ROTOR 50 CYCLE

This part number matches the current model number 106178

Part #106178

50 c motor

This part number matches the current model number 106178

Part #106178

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

seal on the crankshaft was leaking oil

4 of 4 people found this instruction helpful.

Francis from CROWN POINT, NY
Very Easy
30 - 60 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down ... Read more

Read less

Was this helpful?

KNOCKING SOUND AND LOCK UP

3 of 4 people found this instruction helpful.

EDWARD from PHILADELPHIA, PA
Really Easy
15 - 30 mins
Socket set

TURN OFF POWER TO UNIT
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.

Was this helpful?