106173780 Craftsman Compressor - Overview

Diagrams for 106173780

See every part. Know exactly what you need.

Page A

Parts for the 106173780

Square Head Machine Bolt (8 pack)

Part #STD522505

Screw 2Pk

Part #STD503705

Screw 5Pk

Part #STD502505

Tube

Part #VT017100AP

Nipple

Part #HF002401AV

B1212 Brg

Part #STD311212

Switch

Part #158J5

Pump

Part #VT472200AJ

Strain Relei

Part #ST073107AV

Adapter

Part #STD575221

Compr Slv

Part #STD575051

Poly V Belt

Part #BT003100AV

This is an authentic OEM sourced item that is specially designed for use with Craftsman air compressors. It is an identical replacement for a missing or worn belt that drives the unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable rubber and is sold individually.

Common Symptoms of the 106173780

How this model fails, and the parts that fix it.

Air leak

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

seal on the crankshaft was leaking oil

4 of 4 people found this instruction helpful.

Francis from CROWN POINT, NY
Very Easy
30 - 60 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down ... Read more

Read less

Was this helpful?

KNOCKING SOUND AND LOCK UP

3 of 4 people found this instruction helpful.

EDWARD from PHILADELPHIA, PA
Really Easy
15 - 30 mins
Socket set

TURN OFF POWER TO UNIT
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.

Was this helpful?