106170120 Craftsman Compressor - Overview

Diagrams for 106170120

See every part. Know exactly what you need.

Page A

Parts for the 106170120

Crd Kit Assm

Part #EC100200AJ

Square Head Machine Bolt (8 pack)

Part #STD522505

B1212 Brg

Part #STD311212

Belt Grd Front

Part #BG012400AV

Switch

Part #158J5

Gasket

Part #XA001400AV

Truss Screw 8 pck

Part #STD522510

Compr Slv

Part #STD575051

Adapter

Part #STD575221

Table Saw Pulley

Part #STD328022

V-belt Pulley, 2-in

Part #STD328012

Screw 5Pk

Part #STD523107

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with air compressors. The special screw is used with several different models of compressors and the application of the screw can vary based on the model of the machine. This item is available as an individual replacement part.

Common Symptoms of the 106170120

How this model fails, and the parts that fix it.

Air leak

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

seal on the crankshaft was leaking oil

4 of 4 people found this instruction helpful.

Francis from CROWN POINT, NY
Very Easy
30 - 60 mins
Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Removed the guard and belt. Heated the flywheel with a propane torch. Careful not to over heat it. Flywheel came off easily with a 3 point puller. Removed the cap and pulled the old seal out. Cleaned the bore in the cap to get all the oil out and dried it. Started the seal into the cap with the letters out. Carefully pushed the seal down ... Read more

Read less

Was this helpful?

KNOCKING SOUND AND LOCK UP

3 of 4 people found this instruction helpful.

EDWARD from PHILADELPHIA, PA
Really Easy
15 - 30 mins
Socket set

TURN OFF POWER TO UNIT
REMOVE BOLTS ON TOP SIDE OF COMPRESSOR PUMP TO REMOVE PLATE. THERE ARE 2 SMALLER PLATES THAT COVER FLAPPER W/ 2 SMALL SCREWS ON EACH (MAKE NOTE OF SMALL TOP PLATE POSITION) REPLACE FLAPPER AND REASSEMBLE. THERE IS A GASKET ON LARGER PLATE THAT MAY NEED TO BE REPLACED.

Was this helpful?