1039547617 Kenmore Range - Overview

Diagrams for 1039547617

See every part. Know exactly what you need.

Parts for the 1039547617

$19.10

Light Bulb - 40W

★★★★★

(3)

Part #40A15

This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.

$70.92

Drip Bowl - 8 Inch

★★★★★

(1)

Part #WB32X106

This 8-inch chrome drip pan is designed to sit beneath the heating element on electric ranges, serving as a protective barrier that catches spills, drips, and food particles during cooking. Measuring approximately 9.5 inches in diameter and 1.5 inches in height, it is constructed from durable, chrome-plated steel for long-lasting performa...Read more

Read less

$19.95

Drip Bowl - 6 Inch

★★★★★

(2)

Part #WB32X107

This six inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units.

Range Infinite Heat Switch Kit

Part #WB21X36771

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$13.95

Screw

Part #WB1X1130

Sold Individually.

$91.36

Surface Burner Terminal Block Kit

Part #WB17X210

This kit comes with the terminal block, mounting clip and wires.

INSULATION-BACK & Bottom

Part #WB35K5113

INSULATION D

Part #WB2X9123

Rear Drawer Glide

Part #WB2X9146

Also called Rear Block.

Drawer Glide Block

Part #WB2X9148

This part attaches to the drawer support to help guide the bottom drawer.

Light Lens Gasket

Part #WB2X9151

INSULATION

Part #WB2X9430

Common Symptoms of the 1039547617

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Videos related to the 1039547617

Watch our pros, then fix it yourself.

Replacing the Surface Burner Terminal Block Kit

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

There was no heat on the coils.

48 of 52 people found this instruction helpful.

Shaohui from East Lansing, MI
Easy
15 - 30 mins
Pliers

I opened the lid, and found that the terminal blocks were burnt, the wires were melted. I ordered one set of terminal block to replace the burnt one, and it worked. Before I started, I shut off the electricity in the whole house to be safe.

Was this helpful?

Large burner would operate on high setting only.

22 of 28 people found this instruction helpful.

Ernest from Bellevue, NE
Really Easy
15 - 30 mins
Pliers, Socket set

1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.

Was this helpful?

Surface burner coil did not work.

23 of 33 people found this instruction helpful.

Gregory from Mont Belvieu, TX
Easy
30 - 60 mins
Nutdriver, Screw drivers, Socket set

TURN OFF ALL POWER TO KITCHEN. Took off all burner coils and plates below them. Lift hood. Locate part. Remove old part and replace with new part in same way as was previously installed. The wire that comes with the kit is actually too much wire, but just arrange it the best you can and leave it....no big deal. I didn't have a magnet ... Read more

Read less

Was this helpful?