My Orders
1022 - Overview
Models starting with 1022
Click on the best match to narrow your results.
- 1022 Hoover Upright Vacuum
- 1022 Craftsman Miscellaneous (Bench Leg Set)
- 1022000 Maytag Microwave
- 10225 (1988) Kenmore Range (Kenmore Gas Slide-In Range)
- 102273920 Craftsman Lawn Tractor (Lawn Tractor)
- 1022SS ( 1696560-02 2018 ) Briggs and Stratton Snow Blower (22-Inch Snow Thrower, 9.5 Gross Tp)
- 1022VSR (0601022734) Bosch Electric Drill (3/8" Electric Drill)
- 1022VSR (0601022745) Bosch Drill (Drill)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$29.65
In Stock
Heat Resistant Adhesive
Part #W10841140
This is a heat-resistant adhesive for your appliance. The heat resistance allows you to stick parts such as grate feet, gaskets, and felt seals in hot areas, such as a cooktop, without compromising the integrity of the adhesive. It is white in color, and the tube is approximately 7.5 inches long.
$16.37
In Stock
Ceramic Fuse - 20 amp
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
$12.05
Special Order
$6.95
Special Order
Gasket-breather
Part #27549S
This is the gasket that helps to provide an air tight seal for the breather assembly. It is a high quality item that is supplied by original equipment manufacturer for use with Briggs and Stratton and Toro equipment. It is made with durable composite material and it is sold individually. Over time gaskets tend to get compressed and deteriorate, eventually requiring replacement.
$7.95
Special Order
Cap-oil Fill
Part #281658S
This manufacturer approved replacement part is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is utilized to keep the oil in the tank. Please note this durable plastic oil fill cap is sold individually.
$13.95
Special Order
Spring-condensor
Part #260374
$6.95
Special Order
Gasket-intake
Part #27355S
This is an authentic manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. This carburetor intake gasket which provides an air tight seal for the carburetor. Over time gaskets tend to deteriorate and would need to be replaced. It is made out of compound material and it is sold individually. You would need a screwdriver to replace this item.
$10.95
Special Order
Retainer-valve
Part #692194
This is an authentic replacement part manufactured for use with Briggs & Stratton small engines. The special retainer is commonly used as spacing between the head of the valve and the valve spring. The retainer is available as an individual replacement part, please see model diagram for associative parts.
$7.95
In Stock
Lawn Mower Spark Plug
Part #796112S
This is an OEM replacement part and is sold individually. Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine. It will ignite the air fuel mixture by the spark. Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual. Over tim...Read moree a Spark Plug will become fouled because the air/fuel ratio may be set wrong,worn piston rings, carbon build up and other factors. It is better to replace a fouled spark plug, rather then trying to clean it.
Read less
$7.95
Special Order
Screw, 3/8 - 16 X 1-1/4 Taptit
Part #75246GS
$5.95
Special Order
Screw
Part #691061
This is an authentic OEM component from Briggs & Stratton. The magneto armature screw is compatible with many lawn and garden engines. The hardened metal screw helps to mount the magneto armature. A wrench is required for the removal and installation. The magneto armature screw is sold individually. It is recommended to refer to engine manual and diagrams for further instruction.
$8.95
Special Order
Lock-piston Pin
Part #691588
This is an authentic manufacturer-sourced replacement part which is specially made for use with Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is a standard hardware which helps to secure the piston. Please make sure to refer to the appropriate diagrams for your model for the correct location...Read more and application of this pin. Keep in mind this high-quality part is made of durable metal and is sold individually. Pliers will be needed to secure or remove it.
Read less
Exact Part matches for your search term
$71.45
In Stock
Dual Outlet Valve Kit
This part number matches the current model number 1022
Part #4318046
This dual water inlet valve regulates the flow of water to both the ice maker and water dispensing system in a refrigerator, ensuring consistent and reliable operation. Operating on standard household voltage, it uses separate solenoids to control each water outlet independently, helping maintain proper performance for ice production and ...Read morewater delivery. Replacement is often recommended if the refrigerator experiences leaking, reduced or no water flow, or issues with ice making. Constructed from durable materials for long-term use, this component is a common repair solution for bottom-mount and side-by-side refrigerator designs and typically installs with basic hand tools to restore normal water supply function.
Read less
No Longer Available
Common Symptoms of models starting with 1022
How this model fails, and the parts that fix it.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More