1008000 Litton Microwave - Overview

Diagrams for 1008000

See every part. Know exactly what you need.

Page 1

Parts for the 1008000

$16.37

Ceramic Fuse - 20 amp

★★★★★

(1)

Part #WPM0805101

This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.

$12.05

Range Hex Nut

Part #WP488130

Part may differ in appearance, but functions same as original.

USE MAC 59001166

Part #M10D56

USE MAC M0200316

Part #M1D731

USE MAC 10839705

Part #M1D737

SUB M0234029

Part #M1D9

USE MAC 10825501

Part #M20D63

SUB 1731300202

Part #M26D27

SUB M3D71

Part #M3D43

USE MAC 30929P01

Part #M4D39

THERMAL PROTECTOR

Part #M4D49

SUB 29977P01

Part #M6D282

Common Symptoms of the 1008000

How this model fails, and the parts that fix it.

Won’t turn on

Fixed by
these parts

Show All

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

microwave oven blew fuse

27 of 43 people found this instruction helpful.

tad from tamarack, MN
Really Easy
Less than 15 mins
Pliers, Screw drivers

First I removed upper front grill by removing two Philips head screws on top and pulling off. This exposed the Philips head screw which holds control panel in place. After removing screw I pushed up on panel and it came off to expose fuse. With needle nose pliers I removed old fuse and again with pliers held new fuse in position. With th ... Read more

Read less

Was this helpful?

microve stopped working

15 of 30 people found this instruction helpful.

Denice from Montgomery, AL
Really Easy
15 - 30 mins

Jenn-Air Microwave would not turn on. Clock worked , light worked, timer worked and would count down .I changed' Part #0813140 Switch, Micr} cost $8.99 plus shippingNow it works Thank You for good advise

Was this helpful?

Died while heating lasagna

9 of 17 people found this instruction helpful.

connie from madison, NC
Really Easy
Less than 15 mins

Removed 4 small star head screws from back of microwave, lifted body off, removed blown fuse and replaced with new one (found where cord enters). This model is stainless inside and out and I like it a lot. It is also sold by Daewoo and a few other manufacturers.

Was this helpful?