092502-5105-01 Briggs and Stratton Engine - Overview

This item is priced as an individual replacement part. The pick-up tube is made out of plastic and metal. A set of pliers may be helpful when replacing this item. It will require replacing if it becomes broken. This is an OEM Briggs & Stratton part directly sourced from the manufacturer for use in engines.

Hard starting may come from the recoil system instead of the carburetor or spark plug. If the rope pulls but the engine does not turn, the starter clutch may be worn, dirty, or jammed. The clutch turns the crankshaft during starting and lets go when the engine runs. First inspect the rope, rewind spring, pulley, flywheel screen, and clutc...Read moreh bearing. Confirm fit with the complete engine number. Remove the spark plug wire, wait for hot parts to cool, and keep dirt out of the bearing area. Test free movement before putting the shroud back on.

The grip insert attaches to the starter rope. This is an OEM Briggs & Stratton, Toro, and Lawn Boy part directly sourced from the manufacturer for use in blowers, engines, generators, lawn mowers, pressure washers, and vacuums. Keep in mind that this part is sold individually. It is made out of plastic and will need to be replaced if it breaks.

This is an authentic exhaust muffler specially designed for Briggs and Stratton engines commonly used on Toro lawn and garden equipment. It is supplied directly from original equipment manufacturer and it is sold individually. Muffler softens the noise coming from the engine and provides an additional layer of filtration of exhaust. This metal muffler is manufactured to meet EPA exhaust regulations.

This is a genuine Briggs & Stratton and Toro replacement part for use in engines, lawn mowers, and lawn tractors. The muffler deflector is made out of metal. A wrench may be needed during the replacement of this item. It will need to be replaced if it breaks. This item is sold individually.

This authentic OEM replacement part fits a variety of Toro and Briggs & Stratton engines. An O ring is used to retain pressure between rigid parts. Its flexible material allows it to create a tight seal. Many different sizes of O ring are used in these engines; consult manual to be sure of correct placement. Sold individually.

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

This is an authentic Briggs & Stratton replacement part. The throttle shaft seal is commonly found in small engines, such as those used for yard equipment. This part is made of felt, and is used to prevent leakage in the connection between the throttle shaft and the engine. Over time, this part may become worn or frayed, and need repla...Read morecement. You may require a screwdriver or Allen wrench when replacing this part. This item is sold individually.

It is a genuine replacement air cleaner which is supplied by the original manufacturer for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This special element helps to ensure that the air supplied in the engine is free of dust and other harmful contaminants, over time it will get dirty and clogg...Read moreed eventually requiring a replacement to ensure the proper air flow. It is a high-quality component which is made of durable foam material and it is sold individually.