020367-1-580752201 Craftsman Pressure Washer - Overview

This authentic manufacturer-supplied part is specially designed for use with Briggs and Stratton, Troy-Bilt and Snapper pressure washers. It is a special hardware that helps to secure components. This is an identical replacement for a missing or a damaged retainer clip that was installed on a new unit. Note, it is made of durable plastic ...Read moreand is sold in a pack of four. Make sure to refer to the owner's manual and the appropriate diagrams for your model to ensure the proper replacement procedure.

This is an authentic replacement part manufactured for use with pressure washers. The nozzle is used to provide an even spray when using soap or a chemical cleaner. This black soap nozzle is available as an individual replacement part, please see model diagram for nozzle kits for a specific model pressure washers.

This is an authentic OEM sourced replacement part that is intended to be used with pressure washers from Troy-Bilt and Briggs & Stratton. The red nozzle is 0-¦ and attaches to the end of the spray wand. This nozzle emits a small concentrated stream of water. The red nozzle is used to remove tough stains in concrete and metal. It is advise...Read mored to not use this nozzle on wood or siding because this nozzle produces a powerful stream that can damage soft materials. The red nozzle is sold as an individual replacement part.

This is an authentic OEM part from Briggs and Stratton, Troy-Bilt, and Snapper for use with Pressure Washers. The Briggs & Stratton Pressure Washer Pump Saver prevents harmful buildup of hard-water mineral deposits in the pump, maintains pump seals and pistons and promotes longer pump life. It contains anti-freeze to protect the pump from...Read more freezing and provides safe winter storage. This part is sold individually. No mixing, stirring or shaking is required. Just attach the pump saver to the pump and dispense.

This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for t...Read morehe correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.

This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.

This is an authentic OEM part for use with Craftsman Pressure Washers. The quick connector also is known as the wand connects to the spray gun handle and houses the nozzle that directs the spray stream. The most common reason for replacing the wand is if it is leaking or damaged. This part is sold individually. The tool that you will need to replace the wand is Silicone grease (optional).