020232-2-580752012 Craftsman Pressure Washer - Overview

This is an authentic OEM replacement part for use with the pressure washers listed below. It is a quick connect nozzle with a zero (0) degree, straight line spray width. This cutting nozzle is the strongest stationary nozzle and is recommended for use on strong hard surfaces, as it can cause paint removal or scratches. Sold individually.

This is an OEM part sourced directly from the manufacturer. The pump head kit is designed for use in pressure washers from Briggs & Stratton and Troy-Bilt. This part is made of metal, and comes with four bolts for attachment. It is used to direct the flow of water through the machine. You may require a wrench or Allen key when replacing this part.

This is available as a kit that contains all the necessary parts. These are OEM Briggs & Stratton and Troy-Bilt parts directly sourced from the manufacturer for use in pressure washers. They are made out of metal. If these items in the chemical injection kit become broken they will need to be replaced and may require a socket set during the installation.

This bottle of oil is OEM and approved by the manufacturer. It is compatible with dozens of models of pressure washers. This one 4.6 oz bottle is the adequate amount of oil needed for the machine. A socket set is required to remove the plug on the oil pump. It is recommended to use a small funnel to pour the oil into the pump to prevent spillage.

This is a genuine OEM sourced replacement part that is intended to be used with pressure washers from Craftsman. The screen fits into the water inlet tube and is used to prevent debris from the hose from entering the pump assembly. This item is available as an individual replacement part.

This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.

This item has been OEM sourced to ensure quality. The clear plastic hose is intended to be used with pressure washers from Troy-Bilt and Briggs & Stratton. This part includes the fittings at the ends. The hose is used to carry chemicals or soap from the detergent tank to the pump when using the machine to clean. This item is available as an individual replacement part.