020224-0 Briggs and Stratton Pressure Washer - Overview

The breather tube kit is sold as a set that contains all the necessary parts. They are made out of plastic and metal. When replacing these items a screwdriver may be needed. They may become broken and will need to be replaced. These are Briggs & Stratton and Troy-Bilt replacement parts directly sourced from the manufacturer for use in pressure washers.

The engine mounting hardware kit is sold as a set that contains all the necessary parts. These are genuine items that are supplied by the original equipment manufacturer for use with pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper. A wrench set might be necessary during the installation of these parts. These items might break over time and will need replacing.

This manufacturer-approved oil is commonly used in pressure washers. It is made to lubricate the internal pump drive components. This plastic bottle contains 5.3 fluid ounces of oil. It is recommended to wear work gloves to protect your hands when replacing the pump oil. You may need to purchase this item if you run out of oil or your bottle is damaged.

This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.

This item is an authentic OEM sourced O-ring kit that replaces worn or damaged O-rings for the gun, hose and wand.Unfortunately, over time o-rings will wear out and they may begin to crack eventually requiring replacements. Refer to the appropriate diagrams for your model to ensure the correct replacement procedure. A screwdriver and a wr...Read moreench set might be needed to take apart and reassemble the equipment. Note, this kit is sold as an individual item.

This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Pressure Washers. The pressure washer connector lets you convert your pressure washer hose threads to quick connect fittings. First, you affix the male plug to your machine and the female quick-connect coupler to a standard garden hose. Now, you...Read more can easily connect or disconnect your water supply to the pressure washer. The Brass connector is sold individually. No tools needed to install this part.

This part is a genuine replacement wand for use with Troy-Bilt, Snapper and Briggs and Stratton pressure washers. It is an identical replacement for a faulty or a missing part that was included with a new unit. One reason you would need to replace the extension is that the threads on the couplings can strip out over time. Another common p...Read moreroblem is freeze damage to the fittings. If liquid is left in the sprayer during the winter it can freeze. The frozen liquid will expand, causing the fittings to split and then leak. Keep in mind this high-quality extension is sold as an individual item. Refer to the owner's manual for your equipment to ensure the proper application.

Genuine OEM replacement part, this item is sold in a kit. This is the part of the pressure sprayer that threads into the pump(First in, Spring then the Ball). The the chemical hose kit connects to it. Then the chemical hose kit is placed in the material (soap) that you want to use to clean the surface you want.