020201-0 Briggs and Stratton Pressure Washer - Overview

This is a genuine OEM sourced component which is specially designed for Craftsman pressure washers. It is an identical replacement for a missing or damaged outlet that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality part is made of durable metal and is sold individually.

This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.

This bottle of oil is OEM and approved by the manufacturer. It is compatible with dozens of models of pressure washers. This one 4.6 oz bottle is the adequate amount of oil needed for the machine. A socket set is required to remove the plug on the oil pump. It is recommended to use a small funnel to pour the oil into the pump to prevent spillage.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Troy-Bilt and Briggs and Stratton pressure washers. It is an identical replacement for a missing or a faulty handle fastening kit that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for t...Read morehe correct location and application of these components. This high-quality kit is sold individually, keep in mind it includes two durable plastic grips and two bolts to secure them.

This genuine OEM sourced replacement part is designed for use with pressure washers. If the pressure washer runs too long with out the release of water from the sprayer, the water will heat up inside the pump. Once the water gets to a certain temperature the thermal valve will open and release the pressurized hot water, to protect the pum...Read morep. If this happens too often you have a greater chance of damaging your pump. This valve consists of one (1) metal and one (1) plastic piece. To complete this repair you will need a wrench.

Keep in mind that this high-quality part is made of metal and is sold individually. A set of pliers might be helpful during the installation of this part. The e-ring fits onto the wheel and will need to be replaced if it breaks. It is a genuine OEM sourced part which is specially designed for use with generators and pressure washers made by Briggs & Stratton, Troy-Bilt, and Snapper.

This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Pressure Washers. The pressure washer connector lets you convert your pressure washer hose threads to quick connect fittings. First, you affix the male plug to your machine and the female quick-connect coupler to a standard garden hose. Now, you...Read more can easily connect or disconnect your water supply to the pressure washer. The Brass connector is sold individually. No tools needed to install this part.

This part is a genuine replacement wand for use with Troy-Bilt, Snapper and Briggs and Stratton pressure washers. It is an identical replacement for a faulty or a missing part that was included with a new unit. One reason you would need to replace the extension is that the threads on the couplings can strip out over time. Another common p...Read moreroblem is freeze damage to the fittings. If liquid is left in the sprayer during the winter it can freeze. The frozen liquid will expand, causing the fittings to split and then leak. Keep in mind this high-quality extension is sold as an individual item. Refer to the owner's manual for your equipment to ensure the proper application.

This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.