01212-0 Briggs and Stratton Pressure Washer - Overview

Diagrams for 01212-0

See every part. Know exactly what you need.

Parts for the 01212-0

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
18oz 30w 4 Cycle Oil – Part Number: 100005
$8.95
In Stock
18oz 30w 4 Cycle Oil
Part #100005
This bottle of oil can be used in over 150 different types of machinery. It is most commonly used for pressure washers and generators from manufacturers such as Briggs and Stratton and Troy-Bilt. This detergent oil is warranty approved and specially compounded for warm weather use. Please note: it is important to avoid over filling your engine with oil.
Mount, Vibration – Part Number: 21217GS
$13.95
Special Order
Mount, Vibration
Part #21217GS
This is a genuine replacement part that has been sourced from the original manufacturer to be used with generators and pressure washers from Briggs & Stratton and Snapper. The vibration mount fits between the engine and the frame assembly and is used to reduce vibration between the motor and frame. This item is sold as an individual replacement part.
Air Filter Cleaner Cartridge – Part Number: 590601
$32.95
Special Order
Air Filter Cleaner Cartridge
Part #590601
A clogged air filter can limit airflow and may cause poor running, loss of power, or hard starting. This pleated cartridge protects compatible mower, generator, and pressure-washer engines from airborne dirt. Verify fit using the engine model, type, and code numbers found on the engine housing. Remove loose debris from the filter compartment without letting it fall into the intake. Replace the cartridge rather than washing it, and check that the cover and sealing surfaces are secure before returning the equipment to use.
Read less
Assembly, 10 Wheel & Tire – Part Number: B1760GS
$141.95
Special Order
Gasket, Head – Part Number: A2069GS
$14.68
Special Order
Gasket, Head
Part #A2069GS
This is an authentic Briggs and Stratton replacement part manufactured for use with pressure washers. This gasket forms a seal between the pump head and inlet plate spacer. It is recommended to replace pressure washer gaskets when servicing the pump to ensure a proper seal when reassembling the pump. This head gasket is available as an individual replacement part.
Vibe Mount, With Washer – Part Number: 191413GS
$11.95
Special Order
Vibe Mount, With Washer
Part #191413GS
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Briggs and Stratton generators and pressure washers. The purpose of this component is to reduce the vibration of a working unit, unfortunately, over time it may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality vibe mount with a washer is sold individually.
Read less
PISTON, BY-PASS – Part Number: 95416GS
$6.95
Special Order
PISTON, BY-PASS
Part #95416GS
Nut, M8 Flange Serrated – Part Number: 67989GS
$5.95
Special Order
Nut, M8 Flange Serrated
Part #67989GS
This replacement flange nut is an authentic manufacturer-sourced component which is specially designed for use with Briggs and Stratton equipment. It is the hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate for the correct location and use of this part. Keep in mind this durable metal nut is sold individually, you will need a wrench to secure or remove it.
Read less
Garden Hose, Acc, Kit, Qc – Part Number: 6190
$26.95
Special Order
Garden Hose, Acc, Kit, Qc
Part #6190
This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Pressure Washers. The pressure washer connector lets you convert your pressure washer hose threads to quick connect fittings. First, you affix the male plug to your machine and the female quick-connect coupler to a standard garden hose. Now, you can easily connect or disconnect your water supply to the pressure washer. The Brass connector is sold individually. No tools needed to install this part.
Read less
Hose – Part Number: 84006753
$104.95
Special Order
Hose
Part #84006753
This replacement hose is a genuine OEM sourced item that specially produced for use with Craftsman pressure washers. This 25 ft. high-pressure hose is made of durable rubber with metal fittings and it is sold individually. It can be used on pumps that produce up to 2600 PSI. Over time the material may deteriorate or get damaged eventually requiring replacement to maintain a working unit.
Screw, 10 X 0.62 Plastite – Part Number: B3311GS
$5.95
Special Order
Clamp, Hose – Part Number: 48031CGS
No Longer Available
Clamp, Hose
Part #48031CGS
View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bad Camshaft made of plastic
5 of 9 people found this instruction helpful.
  • Dan from Millstone Twp, NJ
  • Really Easy
  • 30 - 60 mins
Ordered a replacement camshaft and had a terrible result. Supposed to be in stock but wasn't. NO update on when the part would arrive. NO contact unless I initiated it. Only email I received stated NO information on when part would arrive. I asked for Customer service to reach out for more details and they balked, did not want to do a nything. I insisted and the result was an email stating no idea. No further info from anyone. I figured my next step was to ask for a refund but figured it would not be refunded. I then found a "dead" engine and used THAT camshaft for my repair. Weeks later your part arrived with ZERO notice. I should have asked for a refund due to your failure to live up to your hype. ZERO stars for this junk. Will NOT ever use you again.
Read less
Was this helpful?
Thank you for voting!
Bad Camshaft made of plastic
2 of 2 people found this instruction helpful.
  • Dan from MILLSTONE TWP, NJ
  • Very Difficult
  • More than 2 hours
Original engine had camshaft made of plastic. Engine had a seal leak on shaft lost oil . Result was seized bearing and stripped camshaft. Ordered a replacement camshaft and gasket. Gasket came in a week after original due date and camshaft is NOT AVAILABLE. Didn't know that at original order. Followed up twice with operator, not ema il and got a non-answer answer. No idea when part will be available and requested a second contact and update. Same no idea reply. Result is a waste of my time with this company, will NOT use them again.
Read less
Was this helpful?
Thank you for voting!
View More