My Orders
Kenmore Freezer Compressors
GET YOUR OFFICIAL Kenmore PARTS TO ENSURE VICTORY
Popular Kenmore Freezer Compressors
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.
The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.
This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.
This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.
The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.
The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.
This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.
This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.
NOTE: This part has been replaced by the manufacturer. It may look different from the original but will still function the same. This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
NOTE: This part has been replaced by the manufacturer. It may look different from the original but will still function the same. This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.
What this part fixes:
- Clicking sound
- Freezer section too warm
- Fridge and Freezer are too warm
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Keep your refrigerator or freezer cooling efficiently with this heat exchanger. It moves heat out of the appliance and helps maintain the right temperature for your food. If your unit isn’t staying cold, replacing this part can restore performance and save energy.
Keep your refrigerator or freezer cooling efficiently with this heat exchanger. It moves heat out of the appliance and helps maintain the right temperature for your food. If your unit isn’t staying cold, replacing this part can restore performance and save energy.
$155.74
In Stock
Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers.
Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet.
Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device.
Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029.
Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.
Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers.
Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet.
Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device.
Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029.
Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.
What this part fixes:
- Freezer section too warm
- Fridge and Freezer are too warm
- Fridge too warm
This compressor start relay is a replacement electrical component that helps start and protect the compressor during operation. It is commonly replaced when cooling systems fail to start, click repeatedly, or shut down shortly after startup. Proper fitment should be verified prior to installation.
This compressor start relay is a replacement electrical component that helps start and protect the compressor during operation. It is commonly replaced when cooling systems fail to start, click repeatedly, or shut down shortly after startup. Proper fitment should be verified prior to installation.
Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.