Hotpoint Refrigerator Doors

Hotpoint Appliance Parts
Shop By Part Type

Popular Hotpoint Refrigerator Doors

Your Price
$41.83
  Special Order
Retainer Bar End Cap - Left or Right Side
PartSelect Number PS299562
Manufacturer Part Number WR2X9144
Sold individually.
Your Price
$28.38
  Special Order
Door Shelf Retainer Bar End Cap
★★★★★
★★★★★
1 Review
PartSelect Number PS299579
Manufacturer Part Number WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Your Price
$76.60
  Special Order
Dairy Door
PartSelect Number PS2354645
Manufacturer Part Number WR22X10068
This is the replacement dairy door for your refrigerator. It is made of clear plastic and is approximately 11 inches wide and 5.5 inches long. The dairy door connects to the shelf and it can be raised and lowered to access the interior of the shelf. The main reason you would want to replace the dairy door is if your old door is cracked or missing. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Your Price
$29.80
  Special Order
Door Closing Cam
★★★★★
★★★★★
2 Reviews
PartSelect Number PS297995
Manufacturer Part Number WR2X4901
This single door closure cam is mounted on the door, not the hinge.
Fixes these symptoms
  • Clicking sound
  • Door Sweating
  • Door won’t open or close
  • See more...
Your Price
$69.75
  Special Order
Dairy Door - Clear
PartSelect Number PS783785
Manufacturer Part Number WR22X10042
This dairy door is a manufaturer approved replacement part for your refrigerator. This part covers the shelf which houses food products such as butter in your fridge. It is made of clear plastic and is approximately 16 inches wide and 8 inches high. Replacing this part is easy, simply snap the old door off its mounting tabs, and secure the new one in place.
Your Price
$74.23
  Special Order
Door Shelf Retainer Bar End Cap - Left or Right Side
PartSelect Number PS298758
Manufacturer Part Number WR2X7975
This end cap can be used for the right or left side of the refrigerator door shelf or the freezer door shelf.
Your Price
$204.22
  Special Order
Fresh Food Door Gasket
PartSelect Number PS296969
Manufacturer Part Number WR24X446
This white fresh food door gasket used to seal the refrigerator door when closed.
Fixes these symptoms
  • Door Sweating
  • Fridge runs too long
  • Fridge too warm
  • See more...
Your Price
$27.44
  Special Order
Door Hinge Shim
PartSelect Number PS298522
Manufacturer Part Number WR2X7491
This is the replacement door hinge shim, or riser cam shim for your refrigerator. It is made of metal and is approximately 2 inches in length, and 1 inch in width. Your refrigerator will have a door hinge shim on each door, and each shim is sold individually. The door hinge shim will have three holes in it; one larger hole, and two smaller ones. The door hinge shim is found on the bottom of your refrigerator door, and the main reason for replacing it is if it is torn or damaged. When you are completing this repair, the door will be briefly unsupported. As a result, it is recommended to remove everything from the door to make it as light as possible, and to ensure that the items in the door don’t fall out. This is an OEM part from the manufacturer.
Fixes these symptoms
Your Price
$79.29
  Special Order
Ice Bucket Display Cover
PartSelect Number PS291959
Manufacturer Part Number WR17X10779
Door Shelf Retainer Bar End Cap - Right Side
PartSelect Number PS299259
Manufacturer Part Number WR2X8700
This is the replacement door shelf retainer bar end cap for your refrigerator. An end cap connects to the lower shelf bar on either side, and then snaps into position on the refrigerator door, allowing you to store items in the refrigerator door. To replace the end cap, simply disengage the whole bar assembly from the refrigerator door, then disengage the hook on the end cap from the rest of the bar assembly. Snap the end cap back into place, and connect it back to the refrigerator door. This part is sold individually.

Related Parts