Grinder Parts

Find Your Part

Model number locator Need help finding your model number?
  • Search your model number to find:
  • Genuine OEM parts guaranteed to fit
  • Free manuals and guides
  • Repair instructions and videos
Original Equipment Manufacturer

Why Genuine OEM Matters
Shop By Brand

Popular Grinder Parts

Your Price
$42.98
  In Stock
Grinder Power Tool Cord
PartSelect Number PS10153842
Manufacturer Part Number 664265-4
This power cord is for power tools. Unplug the power tool before installing this part. Wear work gloves to protect your hands.
Your Price
$47.66
  In Stock
Grinder Circular Saw Trigger Switch
PartSelect Number PS10153579
Manufacturer Part Number 651172-0
This trigger switch is for circular saws. Trigger switch starts and stops the circular saw. Unplug the circular saw before installing this part. Wear work gloves to protect your hands.
Your Price
$58.60
  In Stock
Grinder Power Cord
PartSelect Number PS10153852
Manufacturer Part Number 664463-0
This cord is a genuine Makita replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. Over time, power tool cords will wear out or become frayed. We recommend replacing a cord as soon as signs of wear are visible. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 8 Feet Long
Your Price
$5.95
  In Stock
Grinder Brush Assembly .
PartSelect Number PS18693520
Manufacturer Part Number 290069160
Genuine Ridgid replacement part This brush is sold individually, 2 are needed for this tool It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$39.61
  In Stock
Grinder Switch
PartSelect Number PS10153514
Manufacturer Part Number 650579-7
This is a Push-Button type switch that has 4 terminals, 2 internal and 2 external. This genuine Makita replacement part is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows: • The tool has completely stopped functioning - it will not start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.
Your Price
$56.93
  On Order
Grinder Switch
PartSelect Number PS10153582
Manufacturer Part Number 651195-8
This service switch is specially designed for use with Makita angle grinders. It is supplied directly from original equipment manufacturer. This part plays an important role because it controls on/off function of the tool. Because switches have internal mechanical parts, over time they will wear out requiring replacement switch. This switch has a plastic body and trigger/button. Please this item is sold individually. Replacing this switch is an easy task that would only require a screwdriver. • Remove housing screws • Separate two pieces of a housing • Disconnect wires from the switch • Remove old switch and secure new one in place • Reassemble and test the grinder
Your Price
$7.44
  In Stock
Grinder Pin Cap
PartSelect Number PS10150565
Manufacturer Part Number 417771-6
Genuine Makita replacement part, this item is sold individually. The Pin Cap is part of the spindle lock assembly for the Makita Tool model numbers shown below. When it is pressed it will stop the spindle from rotating, so that a grinding wheel or blade can be removed or installed.
Your Price
$7.44
  In Stock
Grinder Switch Button
PartSelect Number PS10150875
Manufacturer Part Number 419566-3
This switch knob controls the on/off function of the tool, allowing you to start, stop, and lock the tool in operation for continuous use. Made from durable plastic, it is designed to withstand regular wear while maintaining smooth, reliable engagement with the internal switch mechanism. Replacing a worn, cracked, or sticking knob helps restore proper control and ensures consistent, safe operation of your power tool.
Your Price
$7.44
  Special Order
Grinder Compression Spring
PartSelect Number PS10143551
Manufacturer Part Number 233376-2
This is a genuine Makita replacement part, it is sold individually. The 233376-2 Spring is part of the spindle lock system on the Grinders shown below. The reason for locking the spindle is so that you can remove and replace grinding wheels. The other parts need for the spindle lock system are part numbers. • 417771-6 Pin cap • 256486-8 Shoulder Pin • And 256486-8 O Ring.
Your Price
$7.44
  Special Order
Grinder Insulation Washer
PartSelect Number PS10153908
Manufacturer Part Number 681656-4
it is an authentic high quality Makita replacement part that is specially manufactured for use with sanders and grinders. This is the insulation washer for the armature, please make sure to check appropriate diagrams for correct location and use of this item. One durable plastic washer is included per order.

Grinder Brands

Popular Grinder Models

Below are the most popular Grinder models we have. Enter your model number in the search box to find your model.

Need Help Finding Your Model Number?
View More