Gibson Freezer Compressors

This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.

The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.

Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers. Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wire connection shrink tubing, the wire retaining clip and kit instructions sheet. Clarification of instructions: Kit 5304491941 now uses a wire harness with white wires; attach the red compressor power wire to the wire harness adapter's white wire that plugs into the start device terminal at the outside edge of the start device. Replaces original refrigerator and freezer compressor start relay part numbers 216649316, 218721119, 241524601, 241524605 and 5304468029. Fits some refrigerators in the following series: Kenmore and Kenmore Elite 253; Frigidaire FRS, FRT, FRX, FSC, GLH, GLR, GS2, NGS, PHS, PLH and PLRS; Electrolux E23; Crosley CRSE; Gibson GRS and GRT; and White-Westinghouse WRS and WRT. Also fits some upright freezers in these series: Kenmore 253; Frigidaire FFU; and Gibson GFU.

This overload protector helps safeguard the appliance by interrupting power when excessive current or overheating is detected. It plays a critical safety role and is typically replaced when the appliance fails to start or repeatedly trips during operation.

If your refrigerator isn’t cooling properly, the compressor may be the issue. This vital part acts as the heart of the cooling system, circulating refrigerant to keep your appliance at the right temperature. It works by pressurizing the refrigerant gas, which then releases heat and cools as it moves through the system. When the compressor fails or there’s a leak, cooling performance drops significantly. Replacing it can restore your refrigerator’s function and help prevent further issues. For best results, ensure the compressor is properly lubricated and cooled during operation.

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

Keep your refrigerator or freezer running efficiently with this complete compressor kit. The compressor serves as the heart of the cooling system, pressurizing and circulating refrigerant through the evaporator and condenser coils to maintain consistent internal temperatures. This kit includes all essential components for installation, such as the compressor, start relay, capacitor, filter drier, drain pan, tubing extensions, thermal mastic, and a label. Operating on 100–115 volts at 50/60 Hz and using R134A refrigerant, it’s designed for reliable performance. Replacing the compressor may resolve issues like the appliance not starting, inconsistent cooling, or unusual noises. For safety, always disconnect power before installation and follow proper handling guidelines.