General Electric Freezer Hardware

Evaporator Fan Grommet - Red

★★★★★

★★★★★

4 Reviews

This evaporator fan grommet is red in color, and is about 1 inch in diameter.

Lid Bumper The lid bumper or evaporator fan motor bumper in your refrigerator prevents the fan motor from scraping against the side bracket. If your refrigerator/freezer is noisy, the bumper could be worn down or missing, and the sound could be a result of the motor scraping the side bracket. You will find it between the fan motor and the side bracket on the evaporator fan motor assembly. To access the bumper, you will need to remove the evaporator fan motor assembly from the freezer. This part is made of orange rubber and is less than half an inch in diameter. It has a rounded top and a slightly pointed bottom, and is sold individually.

Compression Ring

Evaporator Fan Grommet - Grey This is a replacement evaporator fan grommet for your refrigerator. The fan grommet absorbs the vibration from the evaporator fan motor for quiet operation while it runs. If your evaporator fan is unusually noisy, it could be because the grommet is damaged. This grommet is made of grey plastic and is approximately one inch in diameter. To access the fan grommet and complete this repair, you will need to remove the evaporator fan motor assembly. This part is sold individually.

Hexagonal Screw Sold individually.

SCREW Sold individually.

Sheet Metal Screws - 12 per pack This is a replacement pack of sheet metal screws for your refrigerator. These are Phillips-head screws, and are approximately ¾ of an inch long. This package contains 12 screws. These screws are typically used to attach your refrigerator or freezer door handles to the door. These screws are OEM parts sourced directly from the manufacturer.

Gasket Retainer Clip Kit - 24 Pieces These are used to hold your gasket in place.

Access Panel Retainer Sold individually.

Fan Motor Grommet Can be used with the evaporator or condenser fan motor.