My Orders
Frigidaire Range Igniters
GET YOUR OFFICIAL Frigidaire PARTS TO ENSURE VICTORY
Popular Frigidaire Range Igniters
This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.
This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
This part has a long wire harness. This part ignites the gas to light the oven burner. The wire length is approximately 14 inches long.
This part has a long wire harness. This part ignites the gas to light the oven burner. The wire length is approximately 14 inches long.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
The oven burner igniter ignites the gas to light the oven burner. Possible Repair Solution For: Will not start, no heat, not enough heat.
The oven burner igniter ignites the gas to light the oven burner. Possible Repair Solution For: Will not start, no heat, not enough heat.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
If your oven isn’t heating up or takes forever to preheat, the igniter might be the problem. This part heats up and lights the gas so your oven can bake properly. It’s a common fix for ovens that won’t start or bake evenly. Swapping it out is a great way to get your oven working again—just make sure to turn off the power and gas first.
If your oven isn’t heating up or takes forever to preheat, the igniter might be the problem. This part heats up and lights the gas so your oven can bake properly. It’s a common fix for ovens that won’t start or bake evenly. Swapping it out is a great way to get your oven working again—just make sure to turn off the power and gas first.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
This genuine OEM oven broil igniter kit is designed to reliably ignite the gas burner, restoring proper heating performance to your appliance. Featuring a durable flat ceramic construction with an integrated half-shield, it helps protect the igniter while ensuring consistent ignition. The included 18-inch wire leads provide flexibility for installation, making it a convenient replacement for a worn or failed igniter. Ideal for resolving issues such as slow preheating, failure to ignite, or lack of heat, this component helps restore efficient and dependable oven operation.
This genuine OEM oven broil igniter kit is designed to reliably ignite the gas burner, restoring proper heating performance to your appliance. Featuring a durable flat ceramic construction with an integrated half-shield, it helps protect the igniter while ensuring consistent ignition. The included 18-inch wire leads provide flexibility for installation, making it a convenient replacement for a worn or failed igniter. Ideal for resolving issues such as slow preheating, failure to ignite, or lack of heat, this component helps restore efficient and dependable oven operation.
What this part fixes:
- Gas igniter glows, but will not light
- Little to no heat when baking
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This igniter has a short wire harness. The wire length is approximately 6 inches long.
This igniter has a short wire harness. The wire length is approximately 6 inches long.
What this part fixes:
- Gas igniter glows, but will not light
- Little to no heat when baking
- Will Not Start
Use this igniter with sealed burners.
Use this igniter with sealed burners.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this repair, be sure that the gas valve for the range is shut off. You should also disconnect the power source to the range before you begin.
The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this repair, be sure that the gas valve for the range is shut off. You should also disconnect the power source to the range before you begin.
This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and undo the nut holding it in place. Pull out the igniter wire by hand, and install the new one, replacing the rest of the parts in reverse order.
This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and undo the nut holding it in place. Pull out the igniter wire by hand, and install the new one, replacing the rest of the parts in reverse order.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
$206.95
In Stock
This range surface burner igniter and orifice holder assembly is designed for use on a gas range and is commonly positioned at the right-front burner, often the high-output cooking zone. The assembly combines the igniter electrode and gas orifice to regulate fuel flow and generate a spark, producing a strong, consistent flame rated at 17,000 BTUs for reliable high-heat cooking. Constructed from heat-resistant metal, it is typically replaced when a burner will not ignite, no longer clicks, produces a weak or uneven flame, or shows visible damage such as cracks or carbon tracking on the electrode. Installation generally involves shutting off the gas supply and power to the appliance, removing the burner components, and securing the new igniter and orifice holder in place to restore proper burner ignition and flame performance.
This range surface burner igniter and orifice holder assembly is designed for use on a gas range and is commonly positioned at the right-front burner, often the high-output cooking zone. The assembly combines the igniter electrode and gas orifice to regulate fuel flow and generate a spark, producing a strong, consistent flame rated at 17,000 BTUs for reliable high-heat cooking. Constructed from heat-resistant metal, it is typically replaced when a burner will not ignite, no longer clicks, produces a weak or uneven flame, or shows visible damage such as cracks or carbon tracking on the electrode. Installation generally involves shutting off the gas supply and power to the appliance, removing the burner components, and securing the new igniter and orifice holder in place to restore proper burner ignition and flame performance.