Freezer Circuit Boards and Touch Pads

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater. The best way to make sure you get the correct timer for your refrigerator is to conduct a search for your model number. NOTE: The black lead on the defrost timer, will go to terminal number 2.

User Control and Display - 115V - White Used to control the temperature of the freezer. This electronic control board is for freezers. Electronic control board manages the functions of the freezer such as the temperature settings and defrost cycle time. Safely store any food that could deteriorate while the power is off and unplug the freezer before installing this part. Wear work gloves to protect your hands.

This board is used for the freezer section of the refrigerator. This is the control board only. Touch pad is NOT included. Possible Repair Solution For: Will not start, freezer is too cold, freezer is too warm, freezer runs too long.

This is a 6hr 21 min defrost timer.

This defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, and its terminals are bent, the leads are internal, and the label is orange.

This part works in conjunction with the compressor. This inverter kit is for refrigerators. Inverter kit manages the functions of the refrigerator, such as cooling. Safely store any food that could deteriorate while the power is off. Unplug the refrigerator before replacing the inverter kit. Wear work gloves to protect your hands.

Also known as the start relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.