Electrolux Washer Valves

This OEM water inlet valve assembly with flow meter fits select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. It regulates water flow for efficient operation and energy savings. Unplug the washer and shut off the water supply before installing. Refer to your owner’s manual for model-specific guidance. Verify compatibility before ordering.

This part comes with the sensor/thermistor.

This water inlet valve works with washers

This valve helps your washer get the right amount of water into the detergent, bleach, and softener compartments. If your washer isn’t filling properly, leaking, or not cleaning well, the valve might be the issue. It’s controlled by the machine’s settings and makes sure everything runs smoothly. Be sure to turn off the power and water before replacing it.

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This 3-way water inlet valve controls the flow of hot and cold water into the washing machine, ensuring the correct temperature and water levels for each cycle. Designed with multiple solenoids for reliable regulation, it supports consistent wash performance. Replacing a faulty valve can resolve issues such as slow filling, incorrect water temperature, or leaks, helping restore proper operation.

This valve manages the controlled delivery of water or gas required for appliance operation. By ensuring proper flow and shutoff, it supports both performance and safety and is replaced when leaks, blockages, or flow irregularities develop.

Are you dealing with poor water flow in your washer? The Frigidaire Valve Assembly can help you get it back to peak performance. This dispenser valve complements the heart of your appliance'it controls the water flow right at the dispenser section, helping your washer function smoothly. It's an essential part that enables your washer to operate efficiently. Assuring precise and controlled water supply, this valve plays a vital role in how well your laundry gets cleaned. Think of it as a gatekeeper, ensuring just the right amount of water gets to your clothes. Be sure before beginning to install the valve assembly, it's important to safely disconnect your washer and turn off your water supply. This ensures a risk-free installation process. This valve is not just any replacement part'it's a genuine OEM part, specifically made to work seamlessly with your appliance. It's designed for certain models within the Frigidaire, Electrolux, White Westinghouse, and Tappan ranges. Make sure to check it's the right fit for your specific model to ensure top-notch performance. Arm your washer with the Frigidaire Valve Assembly. Not only will it solve your water flow problem, but it will also bring your washer closer to its original, new-out-of-the-box performance. Get your laundry fresh and clean again with this essential appliance fix.

These valves are where the water supply from the house attach to the washing machine. You connect the hoses to the valve with fill hoses. The fill hoses should have screens installed in them to prevent debris from entering the valve and causing it to stick open or closed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “warm” water. Another common term is water solenoid.