Electrolux Range Igniters

Your Price

$59.86

Electrolux Range Flat Style Oven Igniter

★★★★★

33 Reviews

PartSelect Number PS470129

Manufacturer Part Number 5303935066

This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Gas smell
See more...

Videos!

Your Price

$152.00

Electrolux Range Oven Igniter

★★★★★

100 Reviews

PartSelect Number PS2364063

Manufacturer Part Number 316489403

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Gas smell
See more...

Your Price

$111.77

Electrolux Range Ignitor Bake

★★★★★

11 Reviews

PartSelect Number PS17219382

Manufacturer Part Number 5304534663

If your oven isn’t heating up or takes forever to preheat, the igniter might be the problem. This part heats up and lights the gas so your oven can bake properly. It’s a common fix for ovens that won’t start or bake evenly. Swapping it out is a great way to get your oven working again—just make sure to turn off the power and gas first.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Gas smell
See more...

Your Price

$161.49

Electrolux Range Igniter, Broil

★★★★★

6 Reviews

PartSelect Number PS12584919

Manufacturer Part Number 5303935059

This is an OEM broil igniter, which works with ranges.

Fixes these symptoms

Gas igniter glows, but will not light
See more...

Videos!

Your Price

$128.88

Electrolux Range Broiler Igniter

★★★★★

4 Reviews

PartSelect Number PS11770500

Manufacturer Part Number 5304506545

This igniter has a short wire harness. The wire length is approximately 6 inches long.

Fixes these symptoms

Gas igniter glows, but will not light
Little to no heat when baking
Will Not Start
See more...

Your Price

$97.99

Electrolux Range Spark Ignitor

PartSelect Number PS11728608

Manufacturer Part Number 808608802

The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this repair, be sure that the gas valve for the range is shut off. You should also disconnect the power source to the range before you begin.

Fixes these symptoms

Will Not Start
See more...

Your Price

$138.71

Electrolux Range Front Burner Igniter/orifice Assembly

★★★★★

1 Review

PartSelect Number PS2332312

Manufacturer Part Number 316237805

This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and undo the nut holding it in place. Pull out the igniter wire by hand, and install the new one, replacing the rest of the parts in reverse order.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Gas smell
See more...

Your Price

$191.11

Electrolux Range Surface Burner Igniter And Orifice Holder - Rf 17k

★★★★★

1 Review

PartSelect Number PS2368573

Manufacturer Part Number 316536622

This range surface burner igniter and orifice holder assembly is designed for use on a gas range and is commonly positioned at the right-front burner, often the high-output cooking zone. The assembly combines the igniter electrode and gas orifice to regulate fuel flow and generate a spark, producing a strong, consistent flame rated at 17,000 BTUs for reliable high-heat cooking. Constructed from heat-resistant metal, it is typically replaced when a burner will not ignite, no longer clicks, produces a weak or uneven flame, or shows visible damage such as cracks or carbon tracking on the electrode. Installation generally involves shutting off the gas supply and power to the appliance, removing the burner components, and securing the new igniter and orifice holder in place to restore proper burner ignition and flame performance.