Cooktop Ignitions

A burner that clicks without lighting?or does not spark at all?may have a problem in the ignition system. The replacement spark module provides the electrical pulses that travel to the burner electrodes and ignite the released gas. Replacement may be needed when sparks remain weak, delayed, or absent after the electrodes, switches, wiring, burner caps, and gas supply have been checked. Several faults can cause the same symptoms, so proper testing is important. Turn off electrical power and close the gas valve before service. Reconnect wires exactly as shown in the appliance diagram, and check for gas leaks using an approved method before operating the appliance.

This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

Sold individually. This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

If your burners aren’t lighting or heating properly, this spark module is the fix you need. It sends the spark that ignites the gas, so your range works like new again. Built for reliability, it installs easily—just swap out the old part and reconnect. A quick way to restore safe, consistent cooking.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This part sends enough current to the igniter to create a spark to the bottom of the burner cap.

This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.