Caloric Cooktop Parts

This manufacturer-certified drip bowl is also known as a drip pan, and it is designed for use with cooktops and ranges. It sits below 8-inch burner elements and catches drips and spills from the cookware on the burner. The diameter of the drip bowl is approximately 10 inches. This replacement might appear slightly different, but it will fit your appliance. You will need no tools to complete this repair. Simply remove the burner element, remove the old bowl, line up the hole on the new bowl with the terminal block and drop it into place. Make sure the bowl is flat before reinstalling the element. While you have the element out you should inspect the terminals for corrosion, damage, or discolouration. If you notice any of those things you should also replace the element and terminal block. You will need to replace your drip bowl if it is lost, damaged, or can no longer be cleaned. This replacement part is sold individually. To extend the life of your new drip bowl we recommend you clean it regularly with soap and water. We recommend only using the recommended drip bowl for your appliance; generic versions will not fit properly which could affect the performance of your elements and cause long-term damage.

This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw.

This 6-inch coil surface element is engineered to restore reliable heating performance to your range or cooktop. Delivering 1500 watts of power, it provides consistent heat for everyday cooking tasks. The element features looped pigtail terminal ends for straightforward electrical connection and includes a black center medallion for a clean, finished appearance. Designed to replace a non-functioning burner, this component ensures efficient heat transfer and stable operation. Installation requires proper alignment with the terminal block and support brackets to ensure safety and performance.

This large surface burner is 2100W.

Sold individually.

Proper control of an electric burner depends on the infinite switch working correctly. A failed switch may keep the element from heating, prevent it from shutting off, or hold it at one temperature. Check the element and connections before ordering a replacement. Match the switch to the complete range model and burner location because similar switches may have different ratings. Disconnect power at the breaker, confirm the appliance is not live, and have a qualified technician complete the repair if the wiring is unclear.

This square gas burner grate has sides measuring just over eight inches. This burner is made of square wire and is black in color.

This terminal block mounting bracket is a little over two inches long. It is made of metal.