Amana Washer Hardware
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Amana Washer Hardware
Agitator Bolt
PartSelect Number PS11741866
Manufacturer Part Number WP358237
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
Fixes these symptoms
- Leaking
- Marks left on clothes
- Spins slowly
- See more...
Your Price
$10.14
Screw, 8-16 x 1.000
PartSelect Number PS11746167
Manufacturer Part Number WP8533953
Sold individually.
Thrust Washer
PartSelect Number PS11740482
Manufacturer Part Number WP233520
This washer is 3/4 inches in diameter.
Fixes these symptoms
- Burning smell
- Noisy
- Spins slowly
- See more...
Your Price
$10.14
Hose Clamp
PartSelect Number PS11743008
Manufacturer Part Number WP596669
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Fixes these symptoms
- Leaking
- See more...
Your Price
$10.20
Knob Spring-Clip
PartSelect Number PS11743754
Manufacturer Part Number WP688805
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
Your Price
$6.91
Screw, 8/18 x 3/8
PartSelect Number PS11746840
Manufacturer Part Number WP90767
This screw is sold individually.
Suspension Spring Retainer
PartSelect Number PS11749057
Manufacturer Part Number WPW10145155
This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.
Your Price
$14.15
Spring Retaining Clip
PartSelect Number PS11739294
Manufacturer Part Number WP22001650
This front cover spring retaining clip is not quite an inch long. It is made entirely of metal and is used for some washing machines.
Your Price
$26.41
Bellow To Front Panel Clamp
PartSelect Number PS11773093
Manufacturer Part Number W11032829
The door boot spring clamp or outer bellow clamp on your washer is designed to keep the door boot in place. It is circular in shape, and you will find it wrapped around the bellow. To remove the old clamp, simply open the washer door, and use a screwdriver to pop it out. This is an OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Leaking
- See more...
Related Parts
- All Amana Washer parts
- Amana Washer Agitators
- Amana Washer Belts
- Amana Washer Brackets and Flanges
- Amana Washer Caps and Lids
- Amana Washer Circuit Boards and Touch Pads
- Amana Washer Dispensers
- Amana Washer Drums and Tubs
- Amana Washer Hinges
- Amana Washer Hoses and Tubes
- Amana Washer Knobs
- Amana Washer Latches
- Amana Washer Legs and Feet
- Amana Washer Motors
- Amana Washer Pulleys
- Amana Washer Pumps
- Amana Washer Seals and Gaskets
- Amana Washer Springs and Shock Absorbers
- Amana Washer Switches
- Amana Washer Transmissions and Clutches
- Amana Washer Valves
- Amana Washer Wire Plugs and Connectors