Models > GTD45GBMK0WS > Instructions

GTD45GBMK0WS General Electric Dryer - Instructions

All Instructions for the GTD45GBMK0WS
31 - 35 of 35
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Light bulb blew out inside the dryer
Screwed the light bulb into the socket (duh)
Parts Used:
Light Bulb
  • Donna from Vista, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had difficulty finding the correct size in any store.
All the stores had either a smaller watt or a larger watt and the book suggested always using the correct watt. I was glad to find it on this sight and it was delivered very quickly.
Parts Used:
Light Bulb
  • Linda from The Woodlands, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace light bulb in drum.
Unplug dryer, unscrew bulb then replace with a new bulb. Plug dryer back in.
Parts Used:
Light Bulb
  • Scott from Pascagoula, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Blown bulb
Replaced bulb.
Parts Used:
Light Bulb
  • Carlos from Saint Albans, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldnt stay heated
Took off the top cover then took off the front panel and installed the new coils on gas valve.
Parts Used:
Heat Detector
  • Ron from Parkersburg, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTD45GBMK0WS
31 - 35 of 35
Back to Top