Models > 66512762K313 > Instructions

66512762K313 Kenmore Dishwasher - Instructions

All Instructions for the 66512762K313
16 - 30 of 345
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Replaced silverware basket
No brainer
Parts Used:
Silverware Basket
  • Ronald from Glenwood, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace lower dishwasher rack due to broken tines
Although the lower rack was a slightly different style than our original, it fit the dishwasher perfectly. We needed to transfer the silverware racks to the new rack and insert one set of removable tines. About 5 minutes and we are very happy with the repair.
Parts Used:
Lower Dishrack
  • Daniel from River Falls, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack was rusting, staining dishes.
Rolled out old, rolled in new.
Parts Used:
Lower Dishrack
  • Hugh from ESCONDIDO, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the rollers broke of on the lower dish rack
Snapped the old one off and snapped the new one on.
Parts Used:
Lower Dishrack Wheel Assembly
  • Barbara from BETHESDA, MD
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
15 of 28 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heating for washing or drying
Was a cinch just watched the video whole procedure took an hr or so
Parts Used:
Dishwasher Heating Element
  • Dewey from UNIONTOWN, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water leaking from this appliance onto the floor
removed old gasket, installed new.
No Leaks!!
Saved the cost of a new dishwashers
Parts Used:
Dishwasher Door Seal
  • Raymond from AVONDALE, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door spring cable broken
You need to pull the unit out to get access to the spring connected to the rear leg frame. Use the everything in the kit. The rollers are upgraded and will guid the cable better.
Parts Used:
Door Balance Link Kit
  • garret from Fair Haven, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower dish rack needed replaced
Removed new from box and installed rollers as instructed that's all there was , very easy.
Parts Used:
Lower Dishrack
  • Lester from HARLINGEN, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Parts Used:
Spray Paint - 12 oz. - White
  • Howard from Boynton Beach, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
22 of 52 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
one wheel came off a lower rack 2 wheel roller piece
push the 2 retaining clips back with my fingers and slide off the broken roller piece. Slide the new replacement 2 roller piece into place and push up until the retainer clips click and lock.
Parts Used:
Lower Dishrack Wheel Assembly
  • Dan from HUNTERTOWN, IN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking but I couldn't determine exact cause, so I tried replacing the gasket which is common cause of leaks.
Removed old gasket, cleaned track thoroughly, then followed instructions from video on Part Select order form. Instructions very clear and precise. Getting the new gasket was a little tedious at the corners but take your time and work the gasket with your fingers as shown on the video.
Parts Used:
Dishwasher Door Seal
  • Dale from DOWNINGTOWN, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
7 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The cap of a vertical tine in the dishwasher had come off, leaving an exposed, rusted and sharp top.
The old tine row came out easily and the new one was easy to pop into place. I was pleased that it was so easy to order a replacement part.
Parts Used:
Tine Row
  • Joan from Rockville, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
16 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The door spring link broke.
Unplug dishwasher and slide it out from under cabinet. Remove old broken link (a heavy string between two plastic parts) and replace with new one. Slide dishwasher back and plug it in. Very easy and no tools required.
Parts Used:
Door Balance Link Kit
  • Martin from Discovery Bay, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would not latch shut
Following a utube video made it easy. Removed the outer cover of the door to expose latch. Two screws remove the latch, pay attention to how it was positioned and put the new one on and then replace the panel. But first turn off the electricity to the unit at the fuse box.
Parts Used:
Door Latch - Black
  • RONALD from PRESCOTT, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken bottom rack
Removed old rack and and removed old rollers and installed old rollers on new rack as they work better than the new rollers sent with new rack
Parts Used:
Lower Dishrack
  • Charles from CONVOY, OH
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 66512762K313
16 - 30 of 345