Models > 52270-W0 > Instructions

52270-W0 General Electric Washer - Instructions

All Instructions for the 52270-W0
76 - 77 of 77
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The washer lid lock was burned
UNPLUG APPLIANCE....very simple installation. Raise THE top and the switch is in the corner. Unplug the wiring harness and remove the 2 screws that hold the lid lock on. Reverse the procedure and replace the lid lock.
Parts Used:
Washer Lid Lock with External Safety Switch
  • William H. from Warsaw, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
hose leaking
lifed the lid .remove oud hose and replaced with new hose
Parts Used:
Water Inlet Hose Assembly
  • Daniel from Daingerfield, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 52270-W0
76 - 77 of 77
Back to Top