How do I reset the change filter light?

Many new refigerators will have a water filter indicator light. This light will notify you when it is time to change your water filter. The downside is that it does not automatically reset once you have changed your filter. Resetting the filter light on your refrigerator is slightly different for each manufacturer.MaytagPress and hold the light and lock pads until the change filter light flashes. (approximately 3 seconds)Magic ChefPress and hold the light and lock pads until the change filter light flashes. (approximately 3 seconds)AmmanaPress and hold the light and lock pads until the change filter light flashes. (approximately 3 seconds)Jenn-AirPress and hold the light and lock buttons until the change filter light flashes.WhirlpoolPress down and release the refrigerator light switch 5 times within 10 seconds.KitchenAidPress down and release the refrigerator light switch 5 times within 10 seconds.FrigidiarePress the reset button down on the dispenser untill the light starts to flash.General ElectricPress the reset button on the dispenser for 4 to 8 seconds then release.HotpointPress the reset button on the dispenser for 4 to 8 seconds then release.Find your water filterMore information on water and water filters.