Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
October 8, 2017
The washer will run, but gets stuck mid cycle, spinning or just sitting, the cycle time will not advance, and sometimes add time. Does this sound like a controller board? Or so you suspect something else? Thanks
For model number WPRE6150K2WT
Hello John, Thank you for the question. Sounds like the timer is defective.On your model number the timer is built into the board, so the board will need to be replaced, PartSelect Number PS3506804. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
John Carey
July 23, 2017
Do you have to replace the circuit board when having issues with the start button?
For model number WPRE8150KWT
Hi John,
That is a good question. You may have to replace the either the control panel or the electronic control board. To verify which part you are having an issue with, you can use an Ohms/Multi Meter to check the continuity. I hope this helps. Have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kim
October 10, 2019
So my washer starts fine and then it goes all the way down to 11 minutes left and then it will jump right back up to 20 minutes and it just keeps doing that. We replaced this part and is still doing it does this. Anybody have any idea what the problem is?
For model number PS3506804
Hi Kim,
Thank you for your question. If you have replaced the control board assembly and the washer cycle is still jumping around, there may be another part in the washer that is causing this issue. The other parts you should check are the lid switch and the drive motor and inverter board assembly. You may test the lid switch with a multimeter. For the lid switch, with your multi-meter on the Rx1 setting, touch the probes to the terminals, then press and hold the switch button down. You should receive a reading of zero. If you do not receive this reading, you will need a replacement lid switch. For the electronic control boards, look for any signs of wear, damage, burning, or shorted terminals, visually inspect your electronic control board. If you find any issues while performing the inspection above, you may need a replacement electronic control board. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3506804
Manufacturer Part Number: WH12X10525
