Product Description
Surface Radiant Element with Limiter Specifications
Sold individually.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Surface Radiant Element with Limiter
Troubleshooting
This part fixes the following symptoms:
Element will not heat
This part works with the following products:
Range, Cooktop.
This part works with the following products:
Whirlpool, Maytag, Kenmore, Amana.
Part# W10823696 replaces these:
AP6030926, 74009034, 7406P366-60, 8272565, 8523692, WP8523692
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Rod B - May 16, 2020
Verified Purchase
good repair. Not identical terminals but figured it out
The part arrived in perfect condition
Doug C - August 14, 2019
Verified Purchase
Efficient and excellent service !
Great part and super fast service !
Mitch J - June 14, 2019
Verified Purchase
Works good.
I'm very happy with this service.My stove is working perfectly.
Lorena H - April 8, 2019
Verified Purchase
Easy installation
The part was in great condition, very secure packaging. Courier was very fast, my stove is finally working again! Highly recommended.
Rod A - September 19, 2018
Verified Purchase
Replacement element
The element was in good condition, came very fast and our stove is working again. Thank you.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Right Front Surface Element would not heat
Turn off the power to the Electric Oven.
Remove the 2 screws to the oven top at the front of the stove. Lift the oven top up. Have someone hold it for you. Label the wires that go to the element you are going to replace. Disconnect the wires from the Element. Remove the screw from the bracket that holds the front and rear element in place. It is located at the back of the bracket behind the rear element and you will need small phillips head screw driver. Remove the bad element.. Unscrew the two pointed bracket holder pieces from the old element and screw them into the new element in the same location as the old. Put the new element back into the bracket and put the bracket mount screw back in. Attach the wires back to the new element. Close the oven top. Install the oven top screws at the front of the stove. Turn the power back on and test the element.
Remove the 2 screws to the oven top at the front of the stove. Lift the oven top up. Have someone hold it for you. Label the wires that go to the element you are going to replace. Disconnect the wires from the Element. Remove the screw from the bracket that holds the front and rear element in place. It is located at the back of the bracket behind the rear element and you will need small phillips head screw driver. Remove the bad element.. Unscrew the two pointed bracket holder pieces from the old element and screw them into the new element in the same location as the old. Put the new element back into the bracket and put the bracket mount screw back in. Attach the wires back to the new element. Close the oven top. Install the oven top screws at the front of the stove. Turn the power back on and test the element.
Other Parts Used:
-
Robert from Blackwood, NJ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
80 of 97 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original element coil burned out
I looked how it came out pretty easy, check how your connections are on the unitase you unplug them. Ordered new part from patrs select. the new came in. Make sure you look at the location on the problem part of the tabs on back because it is important on the reinstall of the element ( it is easy it is numbered like a clock) plug in the wires and your ready to go.
Other Parts Used:
-
Mark from Americus, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
24 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the 2500 watts element-surf was opened (wasn't heating)
1 Turn the circuit breaker that feds power to the range/stove off
2 Opened the oven door and found two screws that hold the top part of the range. I removed the screws and disconnected the green cable (ground) so I could have access to the Element-surt
3 Disconnected the four wires that connects the Element and removed the braket that holds it.
4 Replaced the new element, connected the wires and attached the braket.
5 Connected the ground (green cable) and place the top back on place (screwed the top from inside the oven).
6 turned the power on
2 Opened the oven door and found two screws that hold the top part of the range. I removed the screws and disconnected the green cable (ground) so I could have access to the Element-surt
3 Disconnected the four wires that connects the Element and removed the braket that holds it.
4 Replaced the new element, connected the wires and attached the braket.
5 Connected the ground (green cable) and place the top back on place (screwed the top from inside the oven).
6 turned the power on
Other Parts Used:
-
luis from Lincoln, NE
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
20 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The large top burner and the oven bake burner elements as well as the oven light had all burned out
I looked up a how to video on You Tube which I watched and then ordered the appropriate parts which I installed as soon as they arrived. Problem solved.
Other Parts Used:
-
John M from STEELTON, PA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
October 28, 2019
What are the dimensions? I need a replacement for the largest element on the stove top.
For model number GR399LXGQ2
Hello Craig, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11764906 for the Largest 2500 Watt Element. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Oswaldo
July 16, 2019
Hi, I need two 6 inch and one 8 inch burner. Where can I buy them. Thanks, I an in Miami.
For model number RS696PXGQ15
Hi Oswaldo,
Thank you for your question. You may purchase the burners from us either on our website, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. If you would like to purchase the parts locally, you will need to check either online or in your local yellow pages for business that sell appliance parts. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Sally
March 18, 2020
Do you have the largest element for my model? I can not find the dimension.
For model number YGY396LXPS01
Hello Sally, thank you for your question. The largest element, the front left element is PartSelect Number PS11764906. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
April 4, 2019
The left "surface hot" light stays on always. Where is the sensor that powers this light and can it be replaced?
For model number WFE320M0ES0
Hello Pat, thank you for inquiring. This would be the Indicator Light part PS11746053 for your model.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joan
September 18, 2021
Large right front burner only burns on high. How do we get this fixed.
For model number WFE20MOEW0
Hello Joan, thank you for writing, The Large Right Front Switch is PartSelect Number PS11740783. Please view the video for the installation information. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Joel
November 16, 2019
What is the part number for the six inch heating element?
For model number RCC3024LB01
Hi Joel,
Thank you for your question. The part number listed under your model number for the 6 inch element is PS11764915. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Huma
February 7, 2019
I need the smaller one what is its model no?
Hello Huma, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Kathy
March 10, 2023
I need to replace the front left burner and the light bulb. Would like to know the proper part number to order. Thank you so much in advance for your help.
For model number Per5750qcw
Hello Kathy, thank you for your question. The Front Left element is PS11764915 and the Bulb is PS884734. Both of these have installation videos on our site for your convenience. Good luck!
Was this helpful?
Thank you for voting!
Related Parts:
Khang
February 19, 2020
I have Whirlpool cook top to replace element the big one.Cook top model rcc3024 lb01
For model number Cook top elment .RCC3024 LB01 Part # W10823696
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Surface Radiant Element - Part# PS11764906.
Was this helpful?
Thank you for voting!
Alicia
August 17, 2021
Both of the large burners on my stove get stuck on high. It doesn't matter what temp i have it at fr low to medium it will heat like i have it on high. Please let me know what part i need to order to fix this issue.Thanks,
alicia
For model number WFE320M0ES0
Hello Alicia, Thank you for your inquiry. We have researched your model and recommend checking both of the burner switches and the burner elements. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We also recommend checking the wiring between the elements and switches for any visible damage. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11764906
Manufacturer Part Number: W10823696
Manufacturer Part Number: W10823696
Brand
Model Number
Description