Peel and Stick Door Film
Fits your ACO1520AC!
$61.70
Special Order
Fits your ACO1520AC!
PartSelect Number
PS11749067
Manufacturer Part Number
WPW10146437
Manufactured by
Whirlpool
Product Description
Peel and Stick Door Film Specifications
Glass only.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, Amana, KitchenAid, Roper.
Part# WPW10146437 replaces these:
4358752, 4359467, 57001014, 8171844, R0131478, R9800272, R9900242, W10146437
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dirty/Rusty Window
The metal screen in the door of my microwave was rusting and making my "window" look nasty. I was able to take apart the door w/o removing the microwave, peel off the old plastic seal and clean the nasty parts of the glass door. The rust still remains and may be a future problem. But for now, the cleaning was what the door needed and applying the new film was a simple as putting stickers on a gift bag.
Other Parts Used:
-
Geoff from COLUMBIA, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
54 of 71 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
peel and stick on the inside of the microwave door had a hole
Finding the part was the most difficult as this is a very old microwave. I spoke to a really nice lady and we figured out that even though it was not the exact dimensions of my previous film that it would certainly fit since it was just a little bigger that what I had. Once I got it lined up correctly, it was really easy to put on after I removed the backing and took off the old film which wasn't difficult either.
Other Parts Used:
-
Diane from NEWHALL, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jennifer
February 27, 2019
What is the size of the peel and stick film?
For model number MH7130XEB
Hello Jennifer, Thank you for the question. The Film is approximately 17 3/4" x 7 1/2". Thank you for your inquiry, good luck with this repair!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
February 1, 2020
How to apply new door film
For model number MH6150XMT0
Hi Mary. Look at the film and look for a peeling corner. If you do not see an area that is beginning to peel it is okay, you can still remove the film. Grab the corner that is peeling and slowly pull it away from your GE microwave's door. If a corner is not peeling, slide a razor blade under a corner to loosen it up and then peel it back. Peel the entire film away from the door. If it is not peeling away easily, use a glue remover spray, but ensure to wipe the door with soap and water after to remove the chemicals. Remove the sticker backing from the new mesh film sheet. Line the new piece of film up to your GE microwave's door. Press the mesh film sheet down at one corner and slowly lay it across the remainder of the microwave's door until fully covered. Smooth out any bubbles by rubbing the mesh film with a spatula or credit card. Thank you for your question and good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chris
November 30, 2019
The product description says glass only, the film on my microwave is on a metal mesh, will this film work on that?
For model number MH6150XMQ0
Hello Chris and thanks for writing.
Yes, this film is made especially for microwave doors as most have this mash, so it should work. We hope this helps. Please contact us anytime.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
January 28, 2020
How to remove old peel and stick?
For model number MH6150XMT-0
Hello and thank you for writing.
Take apart the door, you should be able to do this without having to take the door off. Just start at one corner using a putty knife to pry the film up a little and just peel it off. Make sure to clean the glass thoroughly before applying the new film. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mary
February 1, 2020
Replacing film on inside of door ok there is grease or rust in the lower corners. I was able to remove but some still remains under the mesh and appears out side of window. Any suggestions of how to remove.
For model number MH6150XMT-0
Hello and thank you for writing.
We would suggest a warm soapy water solution with some baking soda and a toothbrush. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Luis
December 17, 2018
Will this part fit my appliance?
For model number WMH31017AW2
Hi Luis, thank you for your question. Unfortunately that part is not listed as a compatible part underneath your model information. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11749067
Manufacturer Part Number: WPW10146437
Manufacturer Part Number: WPW10146437
Brand
Model Number
Description
Amana
ACO1520AB-PACO1520AB0
Microwave
- Amana Microwave Model ACO1520AB-PACO1520AB0 (ACO1520ABPACO1520AB0, ACO1520AB PACO1520AB0) Parts
Amana
ACO1520AW-PACO1520AW0
Microwave
- Amana Microwave Model ACO1520AW-PACO1520AW0 (ACO1520AWPACO1520AW0, ACO1520AW PACO1520AW0) Parts