This door switch is over an inch long. It is both black and red in color and has two metallic terminals extending from its body.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Samsung Dishwasher Door Switch
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Samsung, Maytag, Amana.
Part# WP99002751 replaces these:
99002751
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
START LIGHT WOULD JUST BLINK AND WOULD NOT DRAIN, JUST BLINK
Switch was not the same switch as what was in the unit, similar but switch was normally closed instead of open, so had to take the switch apart and change sides with the contacts! should be the same, but was not, so in the end worked fine after an adjustment!
Other Parts Used:
Danny from Amarillo, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher would not turn on
Shut off the electricity to the dishwasher. I removed all 11 screws from the door panel. After separating the 2 door panels, I removed the 2 door switches from the door handle ( I used a flat head screw driver to help get them out). Then I unplugged the 2 switches and plugged in the new ones. I replaced the door switches into the door handle ( this was not an exact fit because the new switches is slightly larger than the old ones). I put the new switches in place as tight as I could in the handle. I screwed the 2 screws holding the handle first to secure it before I put all the other screws in the door panel. I turned the electricity to the dishwasher back on. Our dishwasher has been working perfect ever since then and it is over 10 years old.
Other Parts Used:
Simeon from WARRIOR, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terry
September 8, 2017
My dishwasher began not starting sometimes. Sometimes i press the button and it would start and sometimes it wouldn't. Slowly it has gotten worse and now it won't turn on at all. I suspect either the latch or the door switch is bad but have not checked yet. Would you agree or suspect something else?
For model number mdbh950awq
Hi Terry,
Thank you for your inquiry. If your dishwasher is not starting, the door handle and latch assembly with switches will fix the issue. Some other parts you will need to look at are the electronic control board, the control panel, the seal and chopper kit, the float switch kit, the wash impeller, the motor capacitor and the door strike. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul Domino
May 4, 2018
My dishwasher wont start. All of the buttons on the control panel will light up when pressed except for the start button. Upon investigation i found the button to be worn and the door latch to be broken. I replaced the button panel and the door latch assembly including new switches and the machine has the same no start condition. What do you recommend?
For model number MDBH945AWS3
Hello Paul, thank you for your question. If the control panel, and latch have been replaced the only other part it could be is the Electronic Control Part Number: PS11750577. I would recommend replacing that part. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Leslie
December 10, 2018
How to remove wires from old switches to attach to new switches
For model number MDB 7600AWW
Hi Leslie,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install the door switch. Here is a link to the video, https://www.partselect.com/PS11747715-Whirlpool-WP99002751-Door-Switch.htm. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
March 25, 2023
Hello The door handle on my dishwasher had broken so I ordered a new door handle assembly with switches. I installed the new handle and when I went to start it, i pressed the start button and 81 came on, that's the number of minutes it will run. I heard a little bit of water then it stops and goes to 80. Then after around a minute it shuts off. Any suggestions?
For model number MDB4651AWQ
Hi John, thank you for reaching out. Based on our research you may need to replace the door latch with switches. This is part number PS11751688. Good luck with your repair!
Dishwasher fills with water then shuts off. Any ideas on what it might be
For model number MDB8750AWW
Hi Joe, Thank you for the question. Sounds like it is not advancing through the cycles. The cycle timer is built into the control board for this model number and the board will need to be tested for continuity or replaced. PartSelect Number PS2004004. Hope this helps!
Unable to remove wire connection from door switch.
For model number MDB6759AWS1
Hello Ed, thank you for your question. The wire connectors should pull off the micro-switch. You can use needle nose pliers to help if needed. If they will not come off, you will have to cut the connector off the wire, replace the switch and get a new connector to attach to the wire so the wire can be connected to the switch again. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11747715
Manufacturer Part Number: WP99002751
