Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
November 22, 2019
2nd attempt for understanding issue cause/solution.Most used burner’s knob control does not seem to be ‘synched’ so that gas flows when ignitor sparks. all burners’ igniters spark at same time and all gas flows for ignition except the most used burner. can be lit by hand. what part is controlled by turning of knob?
For model number JGC8430BDS
Hello Michael, thank you for inquiring. The most immediate part interacting with the Knobs when you turn them are the Switches, part number PS11744199 for the two Knobs on the left side, and part number PS11744201 for the two switches on the right side. They are sold individually. The Switches are attached to the Manifold Pipe, part number PS11744589. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
November 22, 2019
Most used burner will not ignite - all receive spark but seems this burner’s control knob no longer aligned or synched to allow gas flow during spark sending.
For model number JGC8430BDS
Hi Mike, thank you for your question. There are a couple of parts to check in this case. First you should check your burner electrode. Then you should take a look at your igniter switches/harness. If those parts are fine then you may have to look into your spark module being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744201
Manufacturer Part Number: WP74007774