Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Doug J - February 4, 2023
Verified Purchase
Fix oven for no heat
The part was an exact match switched it out and everything is working like it should
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
16 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sarah
January 16, 2023
My oven temperature is much lower than shows on the display, like 375 when the display says 425. (Two over thermometers agree on the actual temperature, and I can feel that large a difference.)
Is this thermostat what I need to replace or something else? Thank you for your help!
For model number Kitchenaid KSDB900ESS0
Hi Sarah, thank you for asking. We recommend that you check the temperature sensor, part number PS11726314, and the bake element, part number PS11703285, as these are most likely culprits. If you require assistance to place an order, please contact customer service. We hope that helps!
Can this part be expedited, and is this the self cleaning fuse that can go out
Hi Jim,Thank you for your question. The stock status for parts is always listed below the Add to Cart button on our site underneath the part information that you will see above the question and answer section. If you are not sure what a stock status means, you can click on it and a separate window will appear with the explanation for what that status means. When you add the part to your cart you will be given our shipping options. Unfortunately I am not entirely sure what you mean by "Self Cleaning Fuse" however this part is a thermostat. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Maureen
October 22, 2019
When oven is first turned on to bake it shows 177, when i enter 350 and hit start it goes back to 177
For model number wos51ec7aw00
Hello Maureen, thank you for writing. This is likely due to a faulty Oven Sensor, part number PS11744233 for your model wall oven. You may also want to consider the Electronic Control, part number PS11703485. You can test the Oven Sensor with a multi-meter. It should read between 900 and 1200 ohms of resistance to be working correctly. Good luck with your repair!
Was this helpful?
Thank you for voting!
Thomas
January 7, 2020
My double oven stop working after a self cleaning. I have no display on the front button. Door is lock try to turn off breaker and turn back on but still no display. I have power coming to the oven. What can I do? Help! Thanks
For model number WOD51EC7AS01
Hello Thomas, Thank you for the question. With no display and the locked door, it sounds like a defective Electronic Control Board, PartSelect Number PS11756043. We hope this helps!
Hello Juana, thank you for your question. You would access the thermostat from the back of the unit. I hope this helps!
Was this helpful?
Thank you for voting!
Thomas Ingles
January 6, 2020
How can i tell if this part is bad
For model number 4449751
Hello Thomas, thank you for your question. The best way to determine if this part is bad is to test it with a multimeter. It should read between 900 and 1200 ohms of resistance to be working correctly. Good luck with your repair!
Was this helpful?
Thank you for voting!
Peter
May 26, 2023
The oven temp seems to run low and takes a long time to heat up. The broiler did not work so I replaced the broiler element. The broiler still does not work. The oven say 550 but the element does not heat. Should I change the oven sensor?
For model number KEBS209BWH00
Hello Peter, Thank you for your inquiry. We would recommend checking the temperature sensor and the oven thermostat. We hope this helps.
My fan in my oven stays on at all times. The oven heats up but again the fan will not shut off. Do I need to replace the thermostat or the sensor?
For model number Kdrs467vss04
Hello Gary, thank you for reaching out. According to our research, the problem seems to be with the Thermostat, part number is PS11742549. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Gary
December 6, 2023
I have a jenn-air oven and there is no heat. We checked the thermostat part select number WP4449751 and it was open not closed. So we assumed that was the problem installed a new one and once we turned on the electricity blew the thermostat - using multimeter nothing registered like the previous one in the stove. What is causing the thermostat to blow?
For model number jjw343ows
Hello Gary, thank you for reaching out. Make sure your oven vent is clean. The thermal fuse would only blow if the cooling fan is not running up to speed to cool the oven, or the control board is causing the oven to get way too hot. If the oven is getting really really hot (much hotter than what you set it for when cooking), then replace the control board, part number PS11752181. If the oven is just randomly causing the fuse to fail but it is not getting too hot, replace the cooling fan, part number PS11751629, on the back of the oven. We hope this helps, good luck with the repair!
Was this helpful?
Thank you for voting!
Mike
March 1, 2023
The top oven heating will not stop....The temperatures read fine and the oven recognizes (by beeping) that its at temp but it continues to heat....The lower oven works fine with no issues. The temp sensor has been replaced. Control Board?
For model number KODE300ESS04
Hello Mike, thank you for reaching out. We would recommend checking the following parts to fix the issue: thermostat, part number PS11742549, and broil element, part number PS11722938. If still the issue exists, then you may need to replace the upper oven control board, part number PS12348595. We hope this solves your problem!
This thermal fuse is a manufacturer-approved replacement part for your oven. It is common for the oven to lose power after completing a self-cleaning cycle, and the thermal fuse is often at fault. Replacing the blown fus...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Our scratch-free, streak-free formula removes fingerprints, smudges, grease, dirt and oil, while protecting and polishing to repel dust and dirt. Use on all stainless steel appliance brands and surfaces. Stainless Steel ...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742549
Manufacturer Part Number: WP4449751
