Product Description
Agitator Shaft Specifications
This part is used to attach your mixing utensils. Spring is no longer needed.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP243368 replaces these:
AP6007423, 243368, 3184052, 4159760, 4176067, 4176082, WP3184052, WP4176067
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
April R - October 19, 2019
Verified Purchase
No spring....
I was expecting the spring as well like shown in the picture. Very disappointed.
October 21, 2019
Hello April, Thank you for the review. According to the manufacture and the description for this part, This part is used to attach your mixing utensils. Spring is no longer needed. Hope this helps!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken beater shaft
Used the diagram on the website and a video
Totally worked!
Totally worked!
Other Parts Used:
-
Glenda from SANTA FE, NM
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stuck agitator shaft and dough hook
I had a sourdough batch get into the space where dough hook attaches and it got so stuck that nothing - not hot water baths, not pliers and screwdrivers got the dough hook released. I had to open up the mixer following partselect you tube instructions and replacing the parts. What was confusing to me at first is that my 45 year old mixer had an extra screw on top of the shaft that no longer is there for newer models. It took me longer than I am willing to admit to figure that the extra screw is not the result of me skimming the instructions - the original shaft and dough hook went to a friend who broke it attempting to disengage the two parts (the dough turned out to be a very strong form of glue!). The piece is working like new. I preferred the agitator shaft with a spring to hold the end piece tighter, but the new set up without a spring works just fine.
Other Parts Used:
-
Ana from PRT JEFFERSON, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
September 23, 2017
Does this part include the spring and keeper holds the attachments that on the shaft? That's what i'm missing.
For model number KSW75WH
Hi Michael,
Thank you for your question. Yes, this part comes with the small spring. Good luck with your repair.
11 people found this helpful.
Was this helpful?
Thank you for voting!
Yvonne
December 31, 2017
I need the spring that is on the shaft where you put the beater
For model number KSM75SL
Hello Yvonne, Thank you for your inquiry. The spring only comes as part of the shaft, part# WP243368. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Heydi
August 2, 2018
Does it come with spring? It states that it isn't needed but i need it?
For model number KSM150PS
Hi Heydi, Thank you for your question The spring does not come with this part. It is no longer needed to keep your attachments on your shaft. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jamekit
April 17, 2018
I am looking for the kitchen aid stand mixer beater shaft complete with the spring assembly installed. New ksm150 replacement parts may not have the beater shaft spring and do not want the part unless it has the spring on the shaft. I need the part with the spring. Thank you.
For model number KSM150
Hi Jamekit,
Thank you for your question. If you take a look at the picture we have of this part on our site, it looks like the spring already comes on the shaft. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Sara
October 10, 2017
I think i might be missing the piece to my mixer that the attachments, such as a beater or whisk, attach to. Would this part be that? I've seen a couple of videos online that show the blade attachment locking onto a part of the mixer that extends downwards and has a notch that locks the attachment in place.
For model number K45SS
Hi Sara,
Thank you for your question. Yes, this would be the part that your attachments clip on to. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bradley
January 18, 2019
I recently purchased a KitchenAid stand mixer and while reading the instruction book i noticed that the agitating shaft assembly illustrated a spring above the attachment pin. My mixer did not come with that spring so i ordered one on line that also showed the same assembly with that spring. I received my order in two days but no spring. Does this mixer need the spring to operate correctly? If so how do i order and make sure that i get one? Thanks brad
For model number K45SSOB
Hi Bradley,
Thank you for your question. The spring is no longer needed to keep your attachments on your shaft. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Derek
November 16, 2019
Does the agitator shaft come with the retaining ring to hold the gear in place?
For model number K45SS
Hi Derek, this part does not include the retaining ring. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
JAMES
December 7, 2019
Does this part come with the spring and washer as shown? That would be the only reason for me buying it. I know everyone says it is no longer needed but i will not use this machine without that part. There is too much slack and I do not want that.
For model number ksm150pser
Hi James, the part comes with everything as shown in our picture. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Kats
December 19, 2019
Does this come with the spring? In your previous answer to someone else's question you said "the part comes with everything as shown in our picture" around early december 2019. But in the customer review dated oct 2019 someone says "no spring....i was expecting the spring as well like shown in the picture" so which is it? with or without the spring? i would like to replace my non-spring shaft with one with the spring. i understand the spring is no longer needed for operation but i'd rather pay extra money to get one with the spring so it makes less noise. please reply... whether this part you are selling comes with or without the spring? thank you. i would love to order one if it comes with the spring. thanks in advance for clarification.
Hi Kats, thank you for your question. The manufacturer no longer makes a part with the spring because the spring is no longer needed. We hope that helps! Good luck with your repair.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740538
Manufacturer Part Number: WP243368
Manufacturer Part Number: WP243368
Brand
Model Number
Description