Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Duane
January 22, 2018
Is there a test to differentiate between a bad control board vs. timer switch? The symptoms are that the washer stops (turns off) during the wash cycle. It will restart, then stops again. The first symptom was that is would stop before the spin cycle, but it has gotten worse. I can finish a load by repeatedly restarting it. Thank you for your help.
For model number MAH3000AWW
Hello Duane,
Thanks for your question. Yes, the timer can be tested via a multimeter to see if the parts have electrical continuity while the control board can be tested via an ohmmeter. Replace them if they show no continuity. The control board is a more likely problem for your symptom. You may also want to run a diagnostic mode and unplug the machine to see if that fixes your issue.
I hope this helps.
Hi, I was wondering if you could help me. During transport our washing machine was tipped over to the side and hit the ground with no visible damage. Once the washer was re-installed and ran the timer seems somewhat out of sequence but does run through the cycles.The door lock light never comes on indicating the door is locked which seems to affect the spin cycle. Would a new timer correct this issue?Thanks! Tom
For model number MAH3000AWW
Hello Tom, Thank you for the question. If the door lock light does not come on and the door is not locking, I suggest checking to see if the wiring on the door lock may have come loose. You can also test the door lock with a multi meter and check for continuity. This sounds like more of a lock issue if the timer works in the rest of the cycles,. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739364
Manufacturer Part Number: WP22002441
