Product Description
Washer Drain Pump Assembly Specifications
This drain pump is for washers. Drain pump removes water from the washer during the drain portion of the cycle. Unplug the washer before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 5859EA1004P replaces these:
AP5973335, 5859EA1004F, 5859EA1004G, 5859EA1004Q, 5859EA1004R, 5859EA1004X, 5859EA1004Y, AHA74333301, AHA74333302
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
BILL J - February 8, 2024
Verified Purchase
Part was exactly as advertised. Great quality. I’m fortunately LG make low quality products so I couldn’t fix my issue.
PartSelect was amazing to deal with and had great customer support.
Steve D - November 9, 2023
Verified Purchase
Easy fix
Exactly as described. 30 minute job... washer is good as new. Part was delivered in less than 3 days.
Tammy C - September 28, 2021
Verified Purchase
Part was not wrapped in plastic or bubble wrap
The part came cracked and one of the connecting wires was split in half. Had to use parts from old pump to get it fit.
Joseph L - June 22, 2021
Verified Purchase
Perfect match!
The replacement pump was exactly has the original pump which made the repairs very easy. Delivery was fast. Highly recommend purchasing from PartSelect.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
It did not drain water, cycle stops at rinse+spin.
1-Take water off manually. 2- Take machine to back yard. 3- lay machine 45 degrees. 4- Located water bump, (rear left side). 5-removed drain black hoses with hand. 6-removed 3 screws from bump frame. 7-Taker off all unit and marked down cable position at plug. 8- installed new pump. 9- Reverse all steps. Note: I did not use new cable supplied with the new bump, I did not want to mess around on mother board connections, I kept old wire harness which are only two cables blue and gray. It took me less than 30 minutes.
Other Parts Used:
-
Jesus from El Paso, TX
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set, Wrench set
16 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gene
April 24, 2023
tub won't drain and there are no kinks or clogs between the washer drain connection and the sewer
For model number WT1101CW
Hi Gene, thank you for reaching out. We have researched and found that you may need to check the drain pump assembly, part number PS11706439, and replace it if necessary. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Salvatore
August 4, 2023
Good morning my washing machine it's not drained
Thanks
For model number Wt1501cw
Hello Salvatore, thank you for contacting us. Based on the description you have provided, we would recommend checking the drain hose to ensure that it is not clogged. If the issue still occurs, you may need to replace the drain pump, part number PS11706439, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11706439
Manufacturer Part Number: 5859EA1004P
Manufacturer Part Number: 5859EA1004P
Brand
Model Number
Description
Kenmore
79631522210
Washer
- Kenmore Washing Machine Model 796.31522210 (79631522210, 796 31522210) Parts