This assembly comes with two shocks, four nuts, one leveling leg pin and instructions. These shock absorbers keep the washer from vigorous shaking during it's cycles.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Miguel
June 25, 2022
Washer goes thru cycle shows fast spin then goes into no spin cycle
For model number WSSH300G0WW
Hello Miguel, thank you for your inquiry.. We do have a video that may be of some assistance. How to trouble shoot. https://youtu.be/U8L0vAOzzWM. Or, https://www.hunker.com/13410564/how-to-repair-a-washing-machine-that-is-not-spinning-fast-enough. Good luck and have a great day.
Was this helpful?
Thank you for voting!
Karin
February 22, 2024
Washing machine stops mid-cycle and will only run intermittently.
For model number WSSH300G0WW
Hello Karin, thank you for the question. We have narrowed the issue down to the part door lock assembly, part number PS12343346. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
after pulling pins and installing new shocks, the washer still made loud ,disturbing sounds during use. Did some more investigating, turns out the inner bearings on the drum are bad. Apparently a problem with this model. Probably why the original shocks broke in the first place.
