This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
December 15, 2022
It runs for about 25 mins and shuts down.
About half cycle
For model number WFW5620HW1
Hello Brian, thank you for getting in touch. We have researched your model and would recommend checking the following parts to fix your issue: door latch, part number PS12711558, rotor, part number PS12711482, stator, part number PS12717590, and control board, part number PS12711818. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
The washer door on this model when you shut it you push pull out power button it pops up in the led light up it says loc was a little cutest boy in the left bottom can't push play and start the washer wondering what i can do to remedy this problem
For model number WFW5620HW1
Hello Brock, Thank you for your inquiry. The LOC message means that the Control Lock is activated and the washer will not start until it has been deactivated. Try unplugging the washer for 10 minutes first to see if it resets the control. If not then you would have to deactivate it. On your model, it would either be the Power button or the Pause/Start button which you would need to press and hold for 10 seconds to deactivate the control lock feature. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works