This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element i...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
$13.76
In Stock
Questions And Answers for WFE770H0FZ2
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 23, 2022
When oven and cooktop are both in use, circuit breaker is tripping. When used individually range does not trip breaker. How can I isolate which element is causing breaker to trip?
For model number WFE770H0FZ2
Hello John, Thank you for the question. We suggest checking the wiring for the appliance and testing each element with a Multimeter to check the continuity. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Michael
April 13, 2023
When I set the oven to bake, 350 for example. When it gets up to temperature the element stays on and the oven overheats. What is the most likely fix?
For model number WFE770H0FZ2
Hello Michael, thank you for contacting us. If the temperature is offset in the range of 30F to -30F you can adjust it by going to temp off in settings. If this does not solve the problem then the issue is because of a faulty temperature sensor. You may need to replace the temperature sensor, part number PS11726314. We hope this helps!
Hi Shirley, thank you for contacting us. The bake element for your model can be replaced. The compatible bake element is part number PS11703285. We have attached a relevant video for you to help with the installation. Glad to be of assistance!
Even though my oven controller says it’s at 350 the oven temperature is at 250 and will not go any higher, replaced the oven sensor and still no good, help.
For model number WFE770H0FZ2
Hi Edward, thank you for reaching out. As you have already replaced the oven temperature sensor, we would recommend checking the oven control board, part number PS12704743. It monitors the temperature and controls the oven heat. You may need to replace it to fix the issue. We hope this will resolve your problem!
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
Socket Lite come with clips attached to the outside of the housing. After you unhook the 3 lead wires that are attached to the unit. All you have to do is push in on the clips and release the unit. Then you snap in the new unit. Attach the 3 wire leads, put a oven bulb in the socket end, and the install the light cover