This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch control...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
This switch controls the stove top 6" surface burner.
$73.97
In Stock
Questions And Answers for WFE320M0ES0
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Reuven
April 14, 2022
Where is the self clean option on this model??
self clean meaning the mode which cleans the oven on very hot temperature and the door usually locks.
For model number WFE320M0ES0
Hello Reuven, thank you for your question. The part you are searching for is the Electronic Control Board with White Overlay PS12114372( or Black PS12114370) or ( Grey PS12114373). If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Travis, thank you for your question. The f3 error code is in relation to the oven temperature sensor. We would recommend testing or replacing the sensor which is PartSelect Number: PS11749737. Good luck with your repair.
Burner turns on when control is in the off position
Hello Robert, Thank you for the question. This is normally an indication the Switch that controls the Burner is defective and will need to be replaced. We hope this helps!
New Whirlpool oven and after about 20 minutes throws an f3 error, i have read temperature sensor but it is new? I mean it is a year old but no one ever used it.
For model number WFE320M0ES0
Hello Jo, thank you for your question. Yes, that error code is in relation to the oven sensor. It will have to be replaced, which is PartSelect Number: PS11749737. Unfortunately, sometimes these parts can go quite quickly especially if they were not assembled correctly in the first place. I hope this information helps!
Was this helpful?
Thank you for voting!
William
March 26, 2023
Could you tell me the part number of the top right (Large) burner under the black glass top and are you a viable source to purchase?
For model number WFE320M0ES0
Hello William, thank you for contacting us. The surface element, part number PS16543522, will fit in your model. We hope this helps, good luck with this repair!
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the screws because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.