This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This part attaches to the exhaust duct of your clothes dryer.
$22.91
In Stock
Questions And Answers for WED7600XW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rex
March 10, 2020
I have changed the thermal fuse once in 4 months i see where it was also changed 6 mo. Prior to that what do i need to check for temp control to keep from burning another thermal fuse
For model number WED7600XW0
Hi Rex,
Thank you for your question. If the fuse in your dryer is blowing every few months, check the vent and see if it is clogged with lint. If it is, this will cause the fuse to blow as the flow of air inside the dryer has been restricted. The vent should be cleaned thoroughly twice a year and you should also clean the lint filter after each use. If the vent is free of lint, make sure that it is positioned correctly and that there are no kinks in it. If the vent is clear, you will need to check the thermal fuse, the thermostats and the heating element. You will need to test the parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. If you require more information on how to test these parts, go to Appliance Repair on our website and when the next page comes up, select the dryer icon. When the next page comes up, you will see a list of symptoms. Choose, "How To Fix A Dryer That's Not Producing Heat", and the information will come up for you. We hope this helps. Thank you and have a great day.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
November 16, 2021
How do you get heating element out
For model number WED7600XW0
Hello Charles, thank you for your question. We have a generic video that explains how to replace the heating element. It is not your exact model but the steps should be the same. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece in the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
The issue was the idler pulley. First I began opening up the front panel based on a youtube video but soon realized the model was slightly different and required a lot more items to remove. I saw the pulley in the back with nothing in the way so I put the front panel crap back on and removed the rear panel. There it was, very simple to remove and replace. I'm not looking forward to drum rollers though. Hopefully they're aren't as difficult as they appear.