Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wh...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This drawer track or rack slider bar is for use in your dishwasher. It connects to the upper dish rack, and allows the rack top slide in and out. You may need to replace this part if your old rack wil...
This is a replacement middle spray arm in your dishwasher. You will find your middle spray arm mounted on the bottom of the middle dish rack. The upper spray arm rotates and sprays water during the op...
$63.68
In Stock
Questions And Answers for WDT710PAYM6
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
May 8, 2023
Can I just replace the drain pump impeller ??
For model number WDT710PAYM6
Hello Ted, thank you for the query. Based on our research, the drain pump impeller does not come separately. You may need to replace the drain pump assembly, part number PS11753379. We hope this helps!
My dishwasher quits part way through a cycle, any ideas?
For model number WDT710PAYM6
Hi Kurt,
Thank you for your question. If the dishwasher stops part way through a cycle, try opening and closing the door to make sure it is latched correctly. Also, check and see if the circuit to the dishwasher has tripped. Check the heating element as well to see if it is working. If the element is not heating, then this is the most likely cause for the dishwasher to stop in the middle of a cycle. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mitchell
November 2, 2021
My dishwasher is leaking on the bottom right corner but the amount of leakage varies each time. Would that be the bottom of the door seal or something else?
For model number WDT710PAYM6
Hello Mitchell, Thank you for the question. At the Right front Corner has the Float Assembly. We suggest checking the Float and Standpipe for any damage or a blockage keeping the float open creating a leak. We hope this helps
I think that I need a dryer fan motor, replaced the heating element. It’s working better, but not drying properly
For model number WDT710PAYM6
Hi Chris,
Thank you for your question. If you replaced the dishwasher heating element and the dishes are still not drying correctly, you may need to replace the high limit thermostat, part number PS11743423. The high limit thermostat acts as a safety device that keeps the dishwasher from getting too hot. If the thermostat is malfunctioning, it could shut off the heat before your dishes are finished drying. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Hello Rick, thank you for the question. You may need to check the electronic control board, part number PS8260224, to fix the issue. It manages the functions of the dishwasher such as washing, draining, and drying. Glad to be of help!
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
