Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This manufacturer-approved Rack Stop Clip is a gray plastic part which can be installed with a screwdriver. Measuring slightly over an inch in length, it prevents the rack from sliding too far and fal...
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there...
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
This assembly is the wheel and the mount for your upper dishrack. Sold individually. This is an authentic OEM part for use with Whirlpool, KitchenAid, Kenmore and Jenn-Air Dishwashers. The dishrack wh...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This detergent dispenser assembly is for dishwashers.
Detergent dispenser assembly holds the dishwasher detergent and rinses agent in covered compartments.
$137.70
In Stock
Questions And Answers for WDT710PAYM3
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roy
December 28, 2023
Is my heating element bad or is it the thermostat, my dish washer is not drying my dishes?
For model number WDT710PAYM3
Hello Roy, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the continuity of the heating element. If it is not faulty, then replace the high limit thermostat, part number PS11743423, to fix the issue. Glad to be of help!
Have no heat or drying. Replaced the heater element and still no heat. I tested the high temp switch and get continuity. There is no change when I hold the switch over heat. Is this switch a normally closed switch? Oils this be my problem? What else could be the problem? Thanks! John
For model number WDT710PAYM3
Hello John, thank you for your inquiry. The limit switch is a normally closed switch in series with the sail switch and the thermostat. Being temperature actuated, it is designed to "snap open" when an over temperature condition occurs. We have researched the model you have provided, and we would suggest the High limit Thermostat. PS11743423 If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Mary
February 20, 2023
I am in need of the panel that goes under the dishwasher along the floor
For model number WDT710PAYM3
Hi Mary, thank you for your inquiry. According to our research, the part you are looking for is the access panel, part number PS11727780. We hope this helps!
Keeps flashing start LED and will not allow me to run a new cycle. I have unplugged and let sit for 10+ min and plugged back in to help reset. I have hit 3 sequential buttons 3x to run diagnostic. Water is hooked up and running, heating elements working. What can I do to
For model number WDT710PAYM3
Hi Jordan, thank you for reaching out. Based on the description you have provided, we would recommend checking the user interface control board, part number PS11756841. It displays the dishwasher settings and lets you select the cycle. You may need to replace it to fix the issue. We hope this solves your problem!
Caviat: The actual repair is less than 15 minutes, but I spent a lot of time playing with it before I figured out it was that easy and fast. You don't need to remove the dishwasher from the counter to do this. And it will probably help to look at the new part closely so you can understand where the retainer clip is to press it and release the old pump.
First remove the water from the dishwasher pan that would not drain with a wet/dry vac. Otherwise the water will all drain on the floor when you remove the pump. Then remove the two screws on the kickplate on the front of the unit below the door. Remove the kickplate/maintainence access cover. The drain pump is on the right about 8 inches in. Using two hands you grasp the drain pump with your right hand and use the left hand to push the retaining clip down. Then the drain pump will rotate 1/4 turn counterclockwise and can be removed without pulling the dishwasher out. There is likely to be some water leak out that was traped in the pump housing that you can not reach with the vac. Disconnect the wire. Connect the wire to the new pump, put it in place and 1/4 turn clockwise to install it. Replace the kickplate and you're done.
Worked the new gasket into the groove with a smooth screwdriver and my fingers. No leaks and it stays in place. Parts Select had the right part and I got it fast