These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
This agitator comes with the 4 agitator dogs (cogs) and top mover. The cap is NOT included with the agitator.
$200.41
In Stock
Questions And Answers for VAW3584GW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
January 29, 2020
The clothes actuator on this model likes to eat my draw string on hoodies with the garment still attached. How do i remove the actuator from the tub to release the strings?
For model number VAW3584GW1
Hello and thank you for writing.
For your convenience, we have attached the link to our repair video. We hope this helps. Good luck with your repair.
https://www.youtube.com/watch?time_continue=1&v=AjUATmU26AQ&feature=emb_title
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
June 19, 2023
My washer is banging and jumping across the floor
For model number VAW3584GW1
Hi Michael, thank you for reaching out. Based on the description that you have provided, we would recommend checking the washer is perfectly leveled. If it is perfectly leveled, we would recommend replacing the suspension rod kit, part number PS11703288, to fix this issue. We hope this solves your problem!
I used the wrong terminology in the question you just answered. I don't know what you call the center column in the tub that does the washing. So, if you could send me instructions on how to remove this column and I can then retrieve my hoodies draw string.
For model number VAW3584GW1
Hello Robert, Thank you for the question. The Center Column would be the Washer Agitator, PartSelect Number PS11742049. If you enter the part number into the site, there is a How to Video. We hope this helps.
Washer goes thru wash cycle then drains rinse light comes on then nothing
For model number VAW3584GW1
Hello David, Thank you for the question. We suggest checking to see if the water is draining slowly and all of the water is drained from the tub. If the water is draining slow and water is left behind it means there was not enough time in the drain cycle for it to complete and the rinse cycle can not start. Normally this is caused by a blockage in the drain pump or drain hose. We hope this helps!
New washer. Machine won’t start. “Lid Locked” light on. Tried unplugging.
For model number VAW3584GW1
Hi Toni, thank you for reaching out. According to our research, mostly this issue appears when the lid lock is not working, or the control board is not sensing that the lid is locked. We would suggest testing the Lid Lock, part number PS12704713, and the Control Board, part number PS12348137. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs. Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out). Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of old cogs remove and replace with new, reassemble
Pulled off the dispenser. Used socket set to remove bolt. Removed entire agitator out of washer. Placed both feet on bottom of agitator and then pulled up on the upper agitator. It took some muscle due to the years of washer use. I used a flat-head screwdriver to weaken the plastic clips holding down the old bearing-driven cam. Once I got the upper agitator off, the guts were easy to pull out. Then I just re-assembled with the 3 new parts (the Cam Driven, the Dog Ears, and the Bearing-Driven Cam).
