This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible wi...
This part is the replacement oven bulb lens cover. It is made of glass and is approximately 3 inches in diameter. The lens cover is rigid and protects the oven light bulb from being damaged. The main ...
This surface element is for ranges.
Surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before installin...
This radiant stovetop element, or burner, is a genuine replacement part, and is 8 inches in diameter. The radiant element heats your cookware as you prepare food on the stovetop. To complete this repa...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
January 16, 2023
The Left Front TRIPLE Burner was just replaced.
It has 3 burner elements inclusive!
My question is on this particular Triple burner, do all the elements light up with equal brightness intensity? As the midrange element (On the same triple front burner!) seems to be less bright than its counter elements on the same triple burner!
For model number PS950EF3ES
Hi Jim,
Thank you for your question. The different parts of the triple burner element will not have equal brightness. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
January 16, 2023
Do the triple burner elements; inner, middle & outer burn equally bright or does the middle burn less bright than the outer & inner elements?
For model number PS950EF3ES
Hello Jim, thank you for your question. All the burners are different. Left Front(PS2321569) 8"/5" 1900W Bridge, Left Rear(PS2321566) 8" 2000W Bridge, Right Front(PS8754838)12”/9”/6” 3600W Power Boil, Right Rear(PS2370248) 6" 1200W, Center( PS8754837)6" 120W Warming Zone. Good Luck and have a great day.
Ref - GE Profile Electric Range Model No. PS950EF3ES
Triple Inner (Smallest) Burner Not Working!
Had replaced multiple times with new Triple Burner from 3rd party & OEM (GE) and each time inner most burner not working.
What should I be looking for to correct this anomaly?
Thank You
For model number PS950EF3ES
Hello Jim, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the surface element, part number PS8754838, to solve the problem. Glad to be of assistance!
need relay for 12"-triple burner for ge profile model PS950EF3ES range (inner most element not functioning
For model number PS950EF3ES
Hello Jim, thank you for reaching out. We have researched and found that the relays for the burners do not come separately. You may need to replace the touchpad, part number PS11773901. We hope this information helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very easy repair once you get the oven out.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient