This surface element is for ranges.
Surface element supplies the heat to a cooking area on top of the range.
Unplug the range or shut off the house circuit breaker for the range before installin...
This radiant stovetop element, or burner, is a genuine replacement part, and is 8 inches in diameter. The radiant element heats your cookware as you prepare food on the stovetop. To complete this repa...
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
$11.80
Special Order
Questions And Answers for PS920SF3SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Melva
April 19, 2024
I get this electric stove from somebody else , the stove work ok, but the oven is no ok, manual say: bake, temperature, and start I did so, and when push start , go bip bip for some seconds and stop everything oven don't start please help
For model number PS920SF3SS
Hi Melva, thank you for contacting us. We have concluded that the issue is with the control board, part number PS8767155. We would suggest replacing it to solve the problem. We hope that helps!
Touch pad controls, left front 2 element burner runs hi hot all of the time no matter what setting it is on. Right front 3 element burner, only two outer elements work, nothing from small inner element. Both burners are new and have replaced the old ones but the problem remains. Any ideas? Thank you
For model number PS920SF3SS
Hi Bob, thank you for reaching out. If you have already replaced the elements and the issue persists, then we would recommend checking the glass control and board assembly, part number PS11773892, as it is most likely faulty and may need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
George
February 23, 2024
cook top intermittingly cut out when using 2 or more burners
For model number PS920SF3SS
Hi George, thank you for reaching out. We have researched and found that the issue is with the control board, part number PS8767155. We would recommend replacing the control board to fix the issue. Glad to be of assistance!
Removed six 1/4" hex nuts on rear of oven. Then through front/inside removed a single 1/4" hex nut to actually remove sensor. Unplug sensor connector, remove. Reversed steps, push oven back in place and plugged in. Tested oven function.
The existing terminal block on my Ge oven/Range had melted due to a loose wire causing sparking and starting the plastic casing of the terminal block on fire and melting it, Part select made the part easy to find and had it at my house in 2 days. All I had to do was remove six screws to take the back sheet metal cover off of the oven. Unscrew the terminal connections remove two mounting screws that held the terminal on to the oven body. This was a little trickier than it should have been because the melted plastic had reformed making it very hard to access the mounting screws. i then mounted the new piece and plugged the oven in, it took 15 minutes and was very easy. definitely saved me at-least a $100 for the service call i would have made if finding the part wasn't so convenient
Unplugged appliance and removed 5 screws on back of stove/oven and removed plate. Disconnected the sensor and unscrewed it on the inside of the oven. Pulled the cord through and replaced with new sensor. Replaced all parts and plugged in the appliance and tested. Worked great.