This twenty-five watt microwave light bulb is two and a half inches long. It has a small, screw-in base and it carries 120V. This item sells in a quantity of one, though many microwaves require two.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This part maintains the proper temperature. When the refrigerator reaches the desired temperature, this part interrupts the flow of electricity to the compressor which stops the cooling process.
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Peter
March 11, 2020
Can you tell me what year this freezer is
For model number MQC1557AEW
Hello Peter,
Thank you for your question. In order to find the year of manufacturing for this specific model, we will also need the serial number for the mower. Please resubmit your question with both your model and serial number, and help find the year of the freezer. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
John
February 21, 2023
How to install a new door gasket
For model number MQC1557AEW
Hi John, thank you for your question. To install the door gasket, you need to follow these generic instructions.
Steps for removing old Gasket rubber.
1. First you will need to loosen the gasket screws.
2. Lift the front edge of the old gasket from one corner. This will expose the screws that will need to be loosened. Now, you will not be removing the screws, only loosening them.
3. Start by loosening the visible screws and pull the gasket off the door as you go.
4. Continue until the old gasket has been removed completely.
Steps for installing new Gasket rubber
1. Insert the new gasket rubber by turning it from the top edge.
2. Make sure that the rubber is properly seated and slightly tighten the screws.
3. Once proper adjustments are made tighten the screws completely.
Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
.gif "SUPPLEMENTAL INFORMATION Diagram and Parts List for Maytag Freezer")
