This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This hose attaches to water pump assembly.
NOTE: As per the manufacture if the washer has an Eco Ball, it's no longer needed when the new hose is installed.
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This is an actuator switch to trigger bleach, detergent, or fabric softener housings to be dispensed into the tub of your washing machine. If your detergent cups are not dispensing, you may need to re...
This part attaches to the door and fits into the door lock when the door closes.
$14.16
In Stock
Questions And Answers for MHW6000XG2
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Don Fritch
February 20, 2020
Will not spin water out of clothes when loaded, noisy and shakes
For model number MHW6000XG2
Hello Don, thank you for your question. We would recommend checking a few things to determine what the issue is. The shock absorbers, and counterweights on the front of the drum, as well as the drain tubes that go from the tub to the drain pump. If the unit isn't spinning the clothes in the fast spin, and making noise and shaking the most likely issue are one of those aforementioned parts, or the rear tub bearing. That bearing is only available by ordering the tub assembly. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Shane
September 23, 2022
I need the hose insert from the soap drains into the door boot
For model number MHW6000XG2
Hello Shane, thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is part number PS11750867. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
How do we drain the water out of the washer. It's not draining the water out of the clothes.
For model number MHW6000XG2
Hello Enua, thank you for reaching out. Based on our understanding, we would recommend checking the drain hose for any blockage. If the hose is fine, then the issue is most probably with the drain pump, part number PS11752769. It removes water from the washer during the drain portion of the cycle. You may need to replace it to solve the problem. Glad to be of help!
Opened the front panel with 3 crews T-25 or socket wrench. Panel comes off right away.
Look for the leak. Determined it was the hose. Use power pliers to remove the clamp.
The small clamp was easy. The big one I had to use my yoga to get to it. It probably would had been easy from the back panel but moving the machine requires brute force.
Once the hose was out I found some bra under wires which is what probably punctured the hose.
Removed the front filter and found a bunch of nails.
Assembly was much easier and placed clamps so that if needed it would be a lot easier to remove and replace.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.