This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
This burner cap sits on top of the burner base. Sold individually.
$77.80
Special Order
Questions And Answers for MGC7430WS00
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
December 1, 2019
I need to replace the rubber gromets that go on the bottom of the cooking grate.
For model number MGC7430WS00
Hi Bruce,
Thank you for your question. The part number listed under your model number for the burner grate foot is PS11744173. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gerald
April 1, 2023
I'm TRYING TO FIND THE 4 GROMMETS THAT FIT ON THE GRATE AND THINK I FOUND THEM.. ARE they available and if so, how hard are they to replace? Also, what do they cost if I buy them. If available I want to order 8 of them since my cooktop has 2 grates with 4 grommets each grate.
For model number MGC7430WS00
Hello Gerald, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11770098 for the Bumper/Grate Foot. They are sold individually and current prices are shown on the site. The repair is easy and we recommend the Heat Resistant Adhesive, PartSelect Number PS11728058. We hope this helps!
Hello James, thank you for reaching out to PartSelect. Based on our understanding of the issue, we would suggest checking the wire harness, part number PS11751449, to solve the problem. We hope this helps!
Hi Johnny, thank you for the question. The propane orifices for your model do not come separately. They come in a LP conversion kit, part number PS11751454. We hope that helps!
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
I went online and discovered the repair method and schematic of the range. I removed the spark module after first removing the upper rear panel cover and replaced with the new part module ordered from your company and now the spark module operates all the gas elements when they are turned on thus lighting the gas burners. My mother in law was thrilled, as she had been using matches and burning her finger tips,since the original range part malfunctioned. The only problem was the small screw from the original installation was not long enough , so it required some changes to get it affixed to the cabinet side.Thanks for the reasonable price and the right part for the job!!
Removed back upper cover, unscrewed retaining screw from module. As noted in a comment from another do-it-yourselfer, I replaced screw with a longer one and reinstalled module. Note that the replacement part is not exactly the same as the old one(the wires are located differently), I noted the wire color codes with the slot number and reinstalled them in the same slot number. Works fine.